They are here! Notice something different about these seats?!
#16
Rennlist Member
Originally Posted by TheStig
yet having a Corbeau logo on top with another Corbeau less than 3" away from it isn't too much?
This is a discussion forum. You obviously want our opinion by posting the thread. Unfortunately not everyone agrees.
#21
Official Bay Area Patriot
Fuse 24 Assassin
Rennlist Member
Fuse 24 Assassin
Rennlist Member
Thread Starter
there's still the Corbeau emblem below the main script Cyrus. Boy did this company love their logo.
Derek, the seats are decently comfortable, but I'd say after about 2 hours driving your back will be hurting in the lower area. I am going to make my own lumbar support and upholster it in velour with some leftover foam i have in the garage from making chair cushions.
Derek, the seats are decently comfortable, but I'd say after about 2 hours driving your back will be hurting in the lower area. I am going to make my own lumbar support and upholster it in velour with some leftover foam i have in the garage from making chair cushions.
#23
Have a dremmel handy when installing these. Mine weren't an exact fit on the drilled holes, and I had to "slightly modify" one or 2 of the holes to fit the seats.
I have the TRS in my 944 and they're comfortable even after driving 12 hours in it. I love the seats and corbeau does a great job. My only complaint is that mine are 2 years old and faded already. I may just tint the windows to help that though.
I have the TRS in my 944 and they're comfortable even after driving 12 hours in it. I love the seats and corbeau does a great job. My only complaint is that mine are 2 years old and faded already. I may just tint the windows to help that though.
#24
Wax On, Wax Off
Rennlist Member
Rennlist Member
Join Date: May 2003
Location: 5280 ft above the sea
Posts: 17,727
Likes: 0
Received 3 Likes
on
3 Posts
I was gonna say that they had "P*ssy" in em too, but someone beat me to it... I was gonna say that it'd be the first time p*ssy was ever in Andy's seats
but I'm just playin...
but I'm just playin...
#26
Originally Posted by Cyrus951
What about in between the harness points?
#27
Anything where you're going to change the thickness or consistency of the seating surface (using glue or some other adhesive that's going to make a big hard patch) is probably a bad idea.
I would think the only good solution would be some kind of iron-on patch, or to sew them on by hand.
I would think the only good solution would be some kind of iron-on patch, or to sew them on by hand.
#28
Official Bay Area Patriot
Fuse 24 Assassin
Rennlist Member
Fuse 24 Assassin
Rennlist Member
Thread Starter
I got the patches on. I used a glue by Beacon Adhesives that is a permanent bonding to fabrics and embroideries. It hasn't damaged any of the surfaces and the patches are on there tight!
#29
Burning Brakes
Join Date: Jun 2004
Location: NorCal (school) /SoCal (summer)
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
Is there anyway you could remove the Corbeau logos altogether (sorry Corbeau)? Those seats would look great all black with the Porsche logo right on the top.