I need a new nose! What should I get, and do you have what I want?
#17
Originally Posted by ELLSSUU
Trevor, PM 87_944S. He's got the one he took off his car and it looked to be in perfect shape last weekend. Last I heard someone had spoken for it but they hadn't yet picked it up. Perhaps their interest backed off.
EDIT
Ooops, I noticed that the nose you're looking for is a little different than the one I was refering to.
Here's the only picture I saved to my HD of his bumper cover. The car was being put back together after a total repaint. He took the cover off in favor of the snub nose look and a lower front valence (not sure where he got the new valence).
I think he didn't like it because there was basically no bumper protection left for frontal impacts. It's pretty much plastic and fenders with the Fiberworks nose.
EDIT
Ooops, I noticed that the nose you're looking for is a little different than the one I was refering to.
Here's the only picture I saved to my HD of his bumper cover. The car was being put back together after a total repaint. He took the cover off in favor of the snub nose look and a lower front valence (not sure where he got the new valence).
I think he didn't like it because there was basically no bumper protection left for frontal impacts. It's pretty much plastic and fenders with the Fiberworks nose.
#18
Rocket Scientist
Rennlist Member
Rennlist Member
Check out www.gt-racing.com for some of their fronts. Their prices are pretty good but I think their parts need a little work to fit.
#20
Race Car
Join Date: Sep 2003
Location: Orfordville, WI
Posts: 4,202
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ELLSSUU
Trevor, PM 87_944S. He's got the one he took off his car and it looked to be in perfect shape last weekend. Last I heard someone had spoken for it but they hadn't yet picked it up. Perhaps their interest backed off.
EDIT
Ooops, I noticed that the nose you're looking for is a little different than the one I was refering to.
Here's the only picture I saved to my HD of his bumper cover. The car was being put back together after a total repaint. He took the cover off in favor of the snub nose look and a lower front valence (not sure where he got the new valence).
I think he didn't like it because there was basically no bumper protection left for frontal impacts. It's pretty much plastic and fenders with the Fiberworks nose.
EDIT
Ooops, I noticed that the nose you're looking for is a little different than the one I was refering to.
Here's the only picture I saved to my HD of his bumper cover. The car was being put back together after a total repaint. He took the cover off in favor of the snub nose look and a lower front valence (not sure where he got the new valence).
I think he didn't like it because there was basically no bumper protection left for frontal impacts. It's pretty much plastic and fenders with the Fiberworks nose.
#21
#22
Three Wheelin'
Thread Starter
Join Date: Aug 2004
Location: Orange County, CA
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
Oh yah, I forgot about GT Racing...I'll have to go back there and check it out. I *thought* their valence was similarly priced to the Fiberwerks valence, but it's late, so who knows...must double check.
#24
Three Wheelin'
Thread Starter
Join Date: Aug 2004
Location: Orange County, CA
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
The fancy shmancy one is $435 or so, but the stock and stock but 1.5" lower units are only $295...helluva lot cheaper than 944online.com - $450 or something like that. blughhh. So I think I might do GT Racing...maybe....gawd that's still twice as much as used factory units...Who knows. It's late, I shouldn't make a decision now
#25
Advanced
Join Date: May 2002
Location: Kannapolis, NC
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
I have a new FW nosepiece I would like to get rid of. I would take $350 for it. A good deal considering it's never been installed, and all the hardware is there. The only thing used about it is the price. You can e-mail me at Misanthropic@carolina.rr.com
#27
Instructor
Join Date: Jun 2004
Location: South Lake Tahoe
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
I have to chime in here on this...
If anyone decides on the 951 turbo aftermarket nose MAKE sure it is one moulded by AIR. This is the most accurate version out there and my choice due to the special PP had on it last fall. On my ex-87 944 I had a different version (non AIR) mould and it was just like the photos in the Performance Products catalog and shown in my avitar while autocrossing. Very flat on the lower front and not rounded out just like the 951 factory cover. It even has the batwing shape (on the sides) moulded into the cover! Not good.
My new 951 cover made by AIR is NOT like my old one at all and very much like the factory piece in shape and design. All except where it mounts to the front to fit the NA 8v'er nose. I even have the factory 951 bumper support, shocks and tow ring hook nicely tucked in behind! Fits like a glove. I would imagine that a factory lower batwing AND AIR front splitter are in order soon for me.
BTW, when I ordered my front bumper cover from PP I was surprised as ever when it was this nice and made by AIR. Working in and knowing the parts business (parts are sometimes different than the photos...) I would order direct from AIR if I have to replace this one.
If anyone decides on the 951 turbo aftermarket nose MAKE sure it is one moulded by AIR. This is the most accurate version out there and my choice due to the special PP had on it last fall. On my ex-87 944 I had a different version (non AIR) mould and it was just like the photos in the Performance Products catalog and shown in my avitar while autocrossing. Very flat on the lower front and not rounded out just like the 951 factory cover. It even has the batwing shape (on the sides) moulded into the cover! Not good.
My new 951 cover made by AIR is NOT like my old one at all and very much like the factory piece in shape and design. All except where it mounts to the front to fit the NA 8v'er nose. I even have the factory 951 bumper support, shocks and tow ring hook nicely tucked in behind! Fits like a glove. I would imagine that a factory lower batwing AND AIR front splitter are in order soon for me.
BTW, when I ordered my front bumper cover from PP I was surprised as ever when it was this nice and made by AIR. Working in and knowing the parts business (parts are sometimes different than the photos...) I would order direct from AIR if I have to replace this one.
#29
Three Wheelin'
Join Date: Jan 2003
Location: So Cal
Posts: 1,306
Likes: 0
Received 0 Likes
on
0 Posts
Nickhance...
The nose on that black car is sexxxy!
And I also LOVE the Euro nose.
What are our current sources for European front ends? I am VERY interested in euro Fr/Rr bumpers, not only because they look great, but also because I have heard they are substantially lighter than our US front ends.
Any info on the Euro stuff, please chime in!
The nose on that black car is sexxxy!
And I also LOVE the Euro nose.
What are our current sources for European front ends? I am VERY interested in euro Fr/Rr bumpers, not only because they look great, but also because I have heard they are substantially lighter than our US front ends.
Any info on the Euro stuff, please chime in!