And so the project begins
#20
Pro
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The Color is still up in the air. A lot of sanding left to do first. I have also considered a Midnight Blue with Yellow Calipers and Yellow accents inside and under the Hood.
#21
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Helstrm
Another question for you guys. I want to upgrade the brakes to 951 calipers. Besides the rotors what else needs to be replaced?
951 rotors
951 hubs and spindles
When I did it I basically replaced the whole FR suspension witha 951 one.
#23
Nerd Herder
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by yieldsign2
Are those black seats the ones you are going to sell? how much?
![rockon](https://rennlist.com/forums/graemlins/rockon.gif)
#24
Race Car
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
it would be interesting to see how much weight loss you've netted with the lightweight fenders and so on. keep us posted! you could really have a lightweight car if you were serious about losing weight - ie, lightweight seats, wheels, stripped interior, no radio, manual accessories, etc. etc.
#26
Race Car
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
do a search on offset, but briefly:
83-86 offset - 23mm
87+ offset - 52.3mm
83-86 offset - 23mm
87+ offset - 52.3mm
#28
Pro
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Well there has been another change in my project. We were rebuilding an 86 951 when the owner decided to buy a 3.0 S2 motor complete and turbo it.
So now I have a turbo engine and computer, Along with all the wires. So now this light 924 will scream. I am going to replace the suspension and brakes too.
Oh and the engine,Turbo, computer ect. Are also free. So to date my total cost on this project is $0.00
I have heard that some of the turbo guys prefer to run the NA cam... Is this true? Since I have the NA motor I will just steal the cam out of her.
So now I have a turbo engine and computer, Along with all the wires. So now this light 924 will scream. I am going to replace the suspension and brakes too.
Oh and the engine,Turbo, computer ect. Are also free. So to date my total cost on this project is $0.00
I have heard that some of the turbo guys prefer to run the NA cam... Is this true? Since I have the NA motor I will just steal the cam out of her.