When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
here are some pics of what i have done to the car so far. When i took the camshaft off the seal tore cause the idiots that did it before me glued a piece on so it tore when it came off. Where can this be purchased at?? U can see how theere is milkshake everywhere by the pics. I am almost pulling the head off right now. Just two more bolts
also i was told to buy copper spray or something like that to put on the head gasket but i went to autozone and i didn't see anything like that?? Can anyone help me out here.
Pelicanparts is one place many more. Anyways I wouldn't use any of that copper spray crap. IMO you should change that seal everytime you un-torque those bolts. It would start leaking if you just used the old one. You should also keep your lifters in oil so they don't dry out.
Its a gasket maker. Carquest has i saw it in there like 3 days or so ago. Look in the section where they have gasket sealants/makers. There is the blue and red silicones and then the Copper. It says Copper on the little box and the tube its in.
Its a gasket maker. Carquest has i saw it in there like 3 days or so ago. Look in the section where they have gasket sealants/makers. There is the blue and red silicones and then the Copper. It says Copper on the little box and the tube its in.
Thanks man
Also should i san off the rust? and the carbon with high grit sand paper
Actually, I think your looking for the copper spray, not sure, its with the RTV section in a spray can, i am actually heading there now, i'll grab the name.