Blaupunkt EQ BEA-80
09-18-2004, 08:05 PM
#1
Cruisin'
Thread Starter
Join Date: Jun 2004
Location: Easton, PA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Blaupunkt EQ BEA-80
I'm looking for a Blaupunkt Equalizer/ Amplifier Model BEA-80
Can't seem to find a working one in good shape. Does anyone
out there have one for sale (reasonable $). For my '87 944na
Email: Kdoyle@enter.net thanx,
Can't seem to find a working one in good shape. Does anyone
out there have one for sale (reasonable $). For my '87 944na
Email: Kdoyle@enter.net thanx,
09-18-2004, 08:20 PM
#2
Race Car
Join Date: Jun 2003
Location: Albany, CA: celebrating 100 years of independence from Berkeley, CA
Posts: 4,887
Likes: 0
Received 2 Likes
on
2 Posts
Funny you should ask -- I just pulled one out of my '88 TurboS this week. I have never ever used it, so working condition is unknown -- but I have no reason to believe it doesn't work. Send me PM (or e-mail) and we'll talk!
09-19-2004, 09:59 AM
#4
Three Wheelin'
Joe:
I have been using one of these EQs in my '87NA for quite some time, and you will need some additional parts.
You will need a DIN cable to make the connection, and you will need the bezel, and a couple of spring clips.
Here are the part numbers:
Trim: 944 645 501 00
Clip : 944 645 557 00 (2 required)
Cable: 944 645 171 00
Bracket: 944 645 065 00
If memory serves the trim piece around $30.00, and the clips are about $1.50 each, and the bracket was about $4.00.
I'm not sure what a new cable would cost, but I have 2 (TWO) spares, and I'll let you have one for $20.00 + shipping, and I'll throw in a scanned copy of the manual.
For any other interested parties, I also have a BQA-80 amp. This is the same power amp that is in the EQ. I'll let the amp and DIN cable go for $50.00 + shipping.
I have been using one of these EQs in my '87NA for quite some time, and you will need some additional parts.
You will need a DIN cable to make the connection, and you will need the bezel, and a couple of spring clips.
Here are the part numbers:
Trim: 944 645 501 00
Clip : 944 645 557 00 (2 required)
Cable: 944 645 171 00
Bracket: 944 645 065 00
If memory serves the trim piece around $30.00, and the clips are about $1.50 each, and the bracket was about $4.00.
I'm not sure what a new cable would cost, but I have 2 (TWO) spares, and I'll let you have one for $20.00 + shipping, and I'll throw in a scanned copy of the manual.
For any other interested parties, I also have a BQA-80 amp. This is the same power amp that is in the EQ. I'll let the amp and DIN cable go for $50.00 + shipping.
