Notices
924/931/944/951/968 Forum Porsche 924, 924S, 931, 944, 944S, 944S2, 951, and 968 discussion, how-to guides, and technical help. (1976-1995)
Sponsored by:
Sponsored by:

Looking for a bare NA block in the NorthEast

Thread Tools
 
Search this Thread
 
Old 08-11-2004 | 12:32 PM
  #1  
Ken's Avatar
Ken
Thread Starter
Burning Brakes
 
Joined: Jun 2001
Posts: 1,134
Likes: 1
From: The Space Coast
Default Looking for a bare NA block in the NorthEast

I'm looking for a good condition bare NA block to help with my rebuild. If it's from an early car, I already have an oil pump to use. If it's from a late car, I'll need the oil pump as well.

I'd prefer it to be in the Northeast as I'd like to pick it up and not deal with the shipping hassles. I'd also consider a good condition shortblock.

I have one stipulation. If after I purchase the block, I find that it is out of spec and I am unable to use it for my rebuild, I am given a full refund.

Thanks.
Old 08-11-2004 | 01:18 PM
  #2  
david fracolli's Avatar
david fracolli
Three Wheelin'
 
Joined: Jan 2002
Posts: 1,678
Likes: 1
From: Sunnyvale, Ca.
Default

I have a short block located in upstate New York. It has 88 pistons with less than 10,000 miles on them. EEngine is still in the car and was my daily driver up till about 3 weeks ago.
Send me a PM if you are interested.
Old 08-11-2004 | 01:29 PM
  #3  
incessant's Avatar
incessant
Racer
 
Joined: Aug 2003
Posts: 292
Likes: 1
From: Portland, Maine
Default

My '89 n/a always ran a little hot on the temp gauge.. even after a the 60,000 mile servicing.. replaced the radiator, and now the gauge just sits on the first mark all the time.



Quick Reply: Looking for a bare NA block in the NorthEast



All times are GMT -3. The time now is 06:31 PM.