pulling dents
01-03-2005, 03:53 AM
#16
Nordschleife Master
Tom, forget the glue method. I have 4 small hail dents in the sheet metal around the sunroof. Small like you have and are hard too see if you don't have the light angle right. Saw this thread and went and bought a glue repair kit. Tried that out for a couple hours and it did nothing other than waste 20 bucks. Well, I guess I have a glue gun to stick paper together if I ever needed that. 
It just won't work on smaller dents because the glue dot is so small and doesn't have enough strength to pull them out. You need to be pushing up from behind with a metal rod, I think.
It just won't work on smaller dents because the glue dot is so small and doesn't have enough strength to pull them out. You need to be pushing up from behind with a metal rod, I think.
01-03-2005, 11:15 PM
#17
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2002
Location: Granite Falls, Washington
Posts: 1,637
Likes: 0
Received 2 Likes
on
2 Posts
Sorry Ice......it seemed to work pretty well for me, but, maybe it is because of really small size of the dent. I do know that I had to make really sure that the paint was cleaned off real good, and no solvent residue was there or the glue would not hold good enough for me either. For me, I've got a second glue gun now.