Cup holder
#1
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Been on a mission to sort out a cup holder for my 924. Read lots of posts on various options.
I started thinking about these screws that hold the lower dash recently when I disassembled it for cleaning. Pics below. Then I ran across this website for customized phone holders ….
https://coursemotorsports.com/collections/phone-mounts-1
i need a cup holder more than I need a phone mount.
Very similar bracketing to what I was thinking to utilize one or both screws. I hadn’t fabricated with metal or plastic before unfortunately.
Has anyone tried to utilize these screws for a cup holder? Seems like a natural opportunity. I haven’t seen them utilized before.
I started thinking about these screws that hold the lower dash recently when I disassembled it for cleaning. Pics below. Then I ran across this website for customized phone holders ….
https://coursemotorsports.com/collections/phone-mounts-1
i need a cup holder more than I need a phone mount.
Very similar bracketing to what I was thinking to utilize one or both screws. I hadn’t fabricated with metal or plastic before unfortunately.
Has anyone tried to utilize these screws for a cup holder? Seems like a natural opportunity. I haven’t seen them utilized before.
![](https://cimg3.ibsrv.net/gimg/rennlist.com-vbulletin/2000x1504/9c7eb9b7_f5da_42d4_bd5d_84e569720586_e60b6a683a475fa4f4016be23e5f1a22ca3c4283.jpeg)
![](https://cimg5.ibsrv.net/gimg/rennlist.com-vbulletin/2000x1504/0c306f3d_8c38_4e3f_8f52_b5e84feeb50f_dd2e3097e45f2260d457704e21b21e498a9cad96.jpeg)
#2
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It might be possible, but that doesn't seem like it would provide enough support once you would have the weight of a filled container hanging off. Best ones that I have seen use the inner seat rail and have the floor for support.
The following users liked this post:
SeaCay (02-21-2023)
#3
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I use a cup holder that mounts to the passenger seat rail. The location isn't ideal, but it works.
If you're looking to convert a phone mount into a cup holder, maybe look at Rennline's 944 mount: https://www.rennline.com/exactfit-ma...4-sku-pm01-23/
I have one (for a phone), and it would place a cup holder in a ergonomically practical location. Additionally, it's hardy enough to support the weight of a phone, so it should be fine for a cup of liquid.
If you're looking to convert a phone mount into a cup holder, maybe look at Rennline's 944 mount: https://www.rennline.com/exactfit-ma...4-sku-pm01-23/
I have one (for a phone), and it would place a cup holder in a ergonomically practical location. Additionally, it's hardy enough to support the weight of a phone, so it should be fine for a cup of liquid.
#4
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I installed two bicycle water bottle holders in the back of my former daily driver, an Audi Avant wagon.
Would also work in a 924 / 944 chassis.
Would also work in a 924 / 944 chassis.
![](https://cimg9.ibsrv.net/gimg/rennlist.com-vbulletin/918x689/audi_drink_holder_f60310defd07f55d4c3953b06e307717e606cb0e.jpg)
#5
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The wedge works for me! I use it when I need it (shoved between the passenger seat and the center console) and put in in the rear seats when I don't.
There are some other more refined designs. But you get the idea. Works great, even with 44 oz drinks.
![](https://cimg0.ibsrv.net/gimg/rennlist.com-vbulletin/679x691/71tqejaypal_ac_sx679__07f70db9a9af6d28d6b79d327f1e83777e7c5ac2.jpg)
There are some other more refined designs. But you get the idea. Works great, even with 44 oz drinks.
#6
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Audi - Tour De France edition. ![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)