Ian, Brett, Jaun, Elf89,.....ANyone else close by...
#1
Three Wheelin'
Thread Starter
Join Date: Apr 2002
Location: Milwaukee, Wisconsin
Posts: 1,850
Received 0 Likes
on
0 Posts
Ian, Brett, Jaun, Elf89,.....ANyone else close by...
Lets all get together this weekend for a nice drive and some pics...What day should we do it....? This Saturday Or Sunday.....?
DAmian
DAmian
#3
Well, it kinda means you don't understand the concept of torque very well.... Using a strap on the ratchet like you have it setup isn't giving you much of a mechanical advantage. You need to be pulling/pushing on the ratchet from further away from the bolt. Get a breaker bar and put a piece of pipe on the end. That little bit of extra leverage will do way more for you than all that rope tugging.
Originally posted by Cass944
does this mean anything to you?
does this mean anything to you?
#4
howdy damien,
i got my yellow paperweight running near-proper today, so a gtg in the near future is very possible. i left you a voicemail the other day, gimme a holler, 847 293 7540
later
ian
i got my yellow paperweight running near-proper today, so a gtg in the near future is very possible. i left you a voicemail the other day, gimme a holler, 847 293 7540
later
ian
#6
Three Wheelin'
Thread Starter
Join Date: Apr 2002
Location: Milwaukee, Wisconsin
Posts: 1,850
Received 0 Likes
on
0 Posts
Yeah what a nightmare......Got it taken care of tonight though with a nice big breaker bar, and the front coil-over kit has been installed, with new strut cartridges....And man is the car slammed and ride so much nicer....Thanks for the help Brett.....Whats next for this weekend....
And Ian I will be sure to Holla at you within the next couple of days...
DAmian
And Ian I will be sure to Holla at you within the next couple of days...
DAmian
Trending Topics
#9
Site Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: Aug 2002
Location: A great big building in the woods, FL.
Posts: 6,527
Likes: 0
Received 4 Likes
on
3 Posts
Impact Wrench!!!!, turns a nightmare into a 15min job.
The other thing they are good for is that top strut nut. Zip, Zip , Ping!!! across the driveway.
The other thing they are good for is that top strut nut. Zip, Zip , Ping!!! across the driveway.
#10
Three Wheelin'
Thread Starter
Join Date: Apr 2002
Location: Milwaukee, Wisconsin
Posts: 1,850
Received 0 Likes
on
0 Posts
Yeah I even tried my Neighbors brand new Matco Impact, and it would not budge....But with the breaker bar and two of us on it, and a little heat, it came loose...Oh and by the way did I mention it looks oh so sweet....
I cant believe how much of a difference or how far down the *** end came down with just doing the eccentrics....! The ride height is perfect now, why would you even screw with the torsion bars if you were not even tracking the car to lower your car..I dont know.....
DAmian
I cant believe how much of a difference or how far down the *** end came down with just doing the eccentrics....! The ride height is perfect now, why would you even screw with the torsion bars if you were not even tracking the car to lower your car..I dont know.....
DAmian
#11
Hi Guys,
I'm going to be taking a nice drive to Road America on Saturday. The local PCA is redoing Porsche Park on the outside of turn 1. There's some vintage racing event going on so it's $15 to get in. If you feel like driving up there, stop by and say hello. I can't caravan up with you unless you want to leave reeeeeeal early. Have fun,
Eric
I'm going to be taking a nice drive to Road America on Saturday. The local PCA is redoing Porsche Park on the outside of turn 1. There's some vintage racing event going on so it's $15 to get in. If you feel like driving up there, stop by and say hello. I can't caravan up with you unless you want to leave reeeeeeal early. Have fun,
Eric