CyCloNe!

Hey everyone. I acquired an Appbiz RS Carpet for my 944 but I am having a hard time on some of these pieces. A lister had a pdf that showed where he put most of his pieces during the install and I was wondering if anyone has it? The original link the lister made is down as it was back in 2008-2009. Thanks for any help!

CyCloNe!

I may not need it… I still have a few pieces that I am completely clueless about but after starting at all the pictures from the OP’s thread I found out where a few go and I had 2 pieces 90 degrees out.

mj951

Here you go.

CyCloNe!

The Legend Himself! Thank you sir!

AkechiMotors

How did you get the Appbiz carpet? Is he answering emails?

CyCloNe!

I got it from an EBay seller. Now there is an EBay Seller that sells 911 rs kits that will make a 944 one for around $450. It may have been Appbiz’s eBay store, they wouldn’t respond to the emails I sent from their website for some reason.

AkechiMotors

Interesting - what's the seller's username? How's the quality?

DL924S

I bought a kit from Appbiz this winter. Called and talked to Bob multiple times, no problem. Happy with the result.

CyCloNe!

It was Appbiz, I just checked. I would try contacting both ways. Could of been a communication issue. My carpet was purchased from a random owner slightly cheaper new in box. So not directly from Appbiz but I do have an old eBay message from them stating they still make them. Fitment is pretty good, need to glue it down and there are some pieces I have no clue what their for as everything looks covered. The factory carpet is only like 5-7 pieces the Appbiz is like 20 with the rear seat delete and 2 floor mat pieces. I actually have like 24 pieces.

pjs.oregan

Can you take some photos once it's all fitted? I think quite a few people have been looking for a good quality kit for a while. I'm sure at some point I had heard from appbiz that they weren't doing the 944 kit any more.

whalenlg

Bob did a 944 batch a couple
of months ago and I picked up a set. It’s best to contact by phone.

CyCloNe!

Sure thing, I’ll post some. I can tell it needs to be glued down for about half of the pieces. Should have it done in a few weeks as I may put in some light weight sound deadening.

sm

Do we know what the weight difference is between the factory and AppBiz carpet? Thanks

DL924S

I still have the box that the Appbiz carpet arrived in - the UPS shipping label says 19 lbs.

CyCloNe!

I didn’t weight them but my guess would be about half or 1/3, mainly due to the original hatch piece. The factory is a good amount heavier.