bolt in roll bar....how?
#1
Instructor
Thread Starter
Join Date: Oct 2006
Location: Scotch Village, Nova Scotia, Canada
Posts: 192
Likes: 0
Received 14 Likes
on
11 Posts
bolt in roll bar....how?
Hi everyone,
I see that the better bolt in roll bars are mounted on the top of the sills, the flats just below the rear speakers. As far as I can tell, that's an area that you can't get access in behind. How do you get reinforcing plates and nuts on the bolts? Am I missing something??
Thanks,
Gord.
I see that the better bolt in roll bars are mounted on the top of the sills, the flats just below the rear speakers. As far as I can tell, that's an area that you can't get access in behind. How do you get reinforcing plates and nuts on the bolts? Am I missing something??
Thanks,
Gord.
#2
Hates Family Guy
Rennlist Member
Rennlist Member
On my car, what he did was he made a plate the desired size and bolted it to the bar. He then welded the nuts to the bottom of the plate. Put the bar in the car, marked where the bolt holes were. Then drilled holes in the rocker, and welded the plate to the top of the rocker, all the way around. Bingo, bolt in, removable roll bar, but backing plates firmly attached to the car.
#4
Rennlist Member
If you're just looking to add harnesses to get to the track or auto X course occasionally then IMO the best bolt in bar is the Redline Harness bar. I'm pretty sure they are no longer available but come up for sale used every now and again.
It's a four point bolt in using the rear seat belt points and made from tube stock steel. Very sturdy, works great. If you're going racing then not so much.
It's a four point bolt in using the rear seat belt points and made from tube stock steel. Very sturdy, works great. If you're going racing then not so much.
#6
Rennlist Member
Had not seen the Heigo bars before, looks like a good option and possibly available.
#7
Nordschleife Master
If it’s just de or auto-x I suppose they are fine but I’d still get a real roll bar for peace of mind if I’m on a track. This is the harness bar I have on my road car, it came with the car and I don’t know the make, however it attaches to 4 seat belt points like they all do but it doesn’t have a top hoop. I don’t have harnesses in this car or ever take it to the track, I’ve just not got around to removing it...lazy
Trending Topics
#8
Drifting
On my car, what he did was he made a plate the desired size and bolted it to the bar. He then welded the nuts to the bottom of the plate. Put the bar in the car, marked where the bolt holes were. Then drilled holes in the rocker, and welded the plate to the top of the rocker, all the way around. Bingo, bolt in, removable roll bar, but backing plates firmly attached to the car.
Now it's back to street duty and with all the carpets and interior trim back in place , you would never know .
#9
Rennlist Member
Theres a bunch of these harness bars available and they all seem to bolt to the seat belt points, however they cannot be considered in any way as roll bars as they provide zero protection in a roll. I think the ones with a pseudo looking roll bar up top could provide a false sense of security to some folk, personally I think that top hoop is danagerous. First thing that would happen in a roll is the top hoop will break the seat belt bolts and take you and your harness with it.
If it’s just de or auto-x I suppose they are fine but I’d still get a real roll bar for peace of mind if I’m on a track. This is the harness bar I have on my road car, it came with the car and I don’t know the make, however it attaches to 4 seat belt points like they all do but it doesn’t have a top hoop. I don’t have harnesses in this car or ever take it to the track, I’ve just not got around to removing it...lazy
Since i don't get to the track often enough I'm far more likely to roll my car on county roads and ditches but that never played a part in my decision making process.
Works for me. I wouldn't use yours either.
#10
Nordschleife Master
It's a harness bar. And with harnesses offers far better support in my seat than the stock three point belts do, which is why i bought them.
Since i don't get to the track often enough I'm far more likely to roll my car on county roads and ditches but that never played a part in my decision making process.
Works for me. I wouldn't use yours either.
Since i don't get to the track often enough I'm far more likely to roll my car on county roads and ditches but that never played a part in my decision making process.
Works for me. I wouldn't use yours either.
I would have never thought of welding plates in to attach a bolt-in roll bar, ingenious, I’ve learnt something on this thread thank you!
#11
Theres a bunch of these harness bars available and they all seem to bolt to the seat belt points, however they cannot be considered in any way as roll bars as they provide zero protection in a roll. I think the ones with a pseudo looking roll bar up top could provide a false sense of security to some folk, personally I think that top hoop is danagerous. First thing that would happen in a roll is the top hoop will break the seat belt bolts and take you and your harness with it.
If it’s just de or auto-x I suppose they are fine but I’d still get a real roll bar for peace of mind if I’m on a track. This is the harness bar I have on my road car, it came with the car and I don’t know the make, however it attaches to 4 seat belt points like they all do but it doesn’t have a top hoop. I don’t have harnesses in this car or ever take it to the track, I’ve just not got around to removing it...lazy
#12
Intermediate
I built my own for less than $100 of materials and spray paint....welder not included. It bolts into the rear seat belt mounts like the Heigo. I made sure I could still open the sunroof when installed too.
#13
Rennlist Member
Already explained by KurtR, but this is what the weld in plate looks like for a safety devices cage, it has 6 bolts instead of four like the one in the OP pic.