When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I hate to say it but as pretty as that car is, I would open the long enough to replace the heating pipes so you can have an operational heater/defroster and not have to have an auxiliary heater in the interior. I would want it to be correct- the car deserves it to be right. Sorry.
the heater is already out and it is not coming any more, the car will have no heat at all, i want it light , I willl have to find away to get it through the german TÜV
Checking the suspension, the bushings were so hard, the suspension was not allowed to work properly Brakes aparently from a 3.2 with 3.2 and also some turbo components , need to clean that mess as there is a hard point on the steering
Time to start taking the interior apart Cards are out Originals will replace those parts Now the rest of the interior Lots of weight saved Now “just” have to remove the glue
Getting rid of the glue, i have also to get a new dashboard as it has been covered in leather, looks kind of ok, but not really working when you want to reduce weight.
trying a momo jacky ickx steering wheel Momo prototipo signature series Jacky Ickx It fits although still not sure whether i wont replace it with a 914/6 gt steering wheel. Upholsterd dashboard not vorrect, will bevreplaced by a repro Getting the glue out Will judge entrance and egress with rollcage and roof to decide on the seat position First try with the scheel bucket, only goes bolted with no rails, i like the naked doors with no cards, might leave the whole interior naked
06-26-2020 | 07:30 AM
