1967 912 torsion bars
04-09-2007, 01:39 PM
#1
Burning Brakes
Thread Starter
1967 912 torsion bars
OK folks I searched the 912.reg bulletin boards and could not find a definitive answer.
I know my frt sway bar is 13mm and rear is 0mm
but what are the front and rear t-bar sizes??
The stock t-bars give a ride I'd like to maintain, I just want to limit the roll in hard corners a bit more. So I suppose I'm just curious how they measure up to say a stock SC........ BTW..... stock t-bar sizes on an SC????
The car handles great and I do not want to change the balance of the car too much. Therefore I plan on uping only the sway bars to 19mm in front and 16mm in the back. That is if I can find a 16mm rear bar........
I know my frt sway bar is 13mm and rear is 0mm
but what are the front and rear t-bar sizes??
The stock t-bars give a ride I'd like to maintain, I just want to limit the roll in hard corners a bit more. So I suppose I'm just curious how they measure up to say a stock SC........ BTW..... stock t-bar sizes on an SC????
The car handles great and I do not want to change the balance of the car too much. Therefore I plan on uping only the sway bars to 19mm in front and 16mm in the back. That is if I can find a 16mm rear bar........
04-12-2007, 10:41 PM
#3
The Hoffinator
Rennlist Member
Rennlist Member
man.. i dont know what to offer for advice or what was opriginal or whats the new hot thing. I am oblivious when it comes to suspensions since i havent had a chance to dive into mine yet. 
sorry i cant help
sorry i cant help
