934 front end progress
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jun 2001
Location: Concord, NC
Posts: 2,882
Likes: 0
Received 0 Likes
on
0 Posts
934 front end progress
Guys:
Rick has been asking me to post some pics of my 934 front end project.
So here is the progress as it sits today.
I still need to make the grill covers, tidy up the wiring before painting.
934 Front End Pics
Also, my front opening for the oil cooler, I am going to clean that up also, if you notice the cut is not smooth. I did that quickly yesterday so I could test my oil cooler. While riding around yesterday, the temp never even reached the 1st mark on the temp gauge and the temp here was around 86 degrees with high humidity.
Oil Cooler is a Setrab 172 - AN12 fittings.
Front end is quickly removable (so that I can load the car on the trailer) via 6 DZUS fasteners.
Rick has been asking me to post some pics of my 934 front end project.
So here is the progress as it sits today.
I still need to make the grill covers, tidy up the wiring before painting.
934 Front End Pics
Also, my front opening for the oil cooler, I am going to clean that up also, if you notice the cut is not smooth. I did that quickly yesterday so I could test my oil cooler. While riding around yesterday, the temp never even reached the 1st mark on the temp gauge and the temp here was around 86 degrees with high humidity.
Oil Cooler is a Setrab 172 - AN12 fittings.
Front end is quickly removable (so that I can load the car on the trailer) via 6 DZUS fasteners.