'75-'78 930 engine compartment rubber bumpers
01-27-2019, 07:19 PM
#17
1st Gear
Join Date: Jan 2019
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
David looking for engine compartment rubber bumpers
Posted this on Pelican also.
The rubber bumpers that support the rear lid on 930’s from 1975-1978. Yours are probably missing or if you still have them, they are hard and brittle. They can be installed on later years also.
Here’s the deal on these. I have a ’78 930. The rubber bumpers on my car were missing so I set out to find a pair. Not only could I not find replacements, I couldn’t even find a part number or even the part in the PET. It was like it didn’t even exist.
I managed to get an original from a good friend of mine off his ’78 and had it reproduced. It was very expensive to have all the tooling done and manufacturing. I realize they are a little pricey, but I spoke to several owners and they all seemed to think that this was a fair price. This is a hobby for me. I’m not looking to get rich, just trying to recoup my costs and make a few bucks to buy more parts.
Those of you who have seen the Turbo stripes I made, you know how OCD I am. It has to be perfect. These came out great.
$48 a pair shipped CONUS
Thanks,
Tom
The rubber bumpers that support the rear lid on 930’s from 1975-1978. Yours are probably missing or if you still have them, they are hard and brittle. They can be installed on later years also.
Here’s the deal on these. I have a ’78 930. The rubber bumpers on my car were missing so I set out to find a pair. Not only could I not find replacements, I couldn’t even find a part number or even the part in the PET. It was like it didn’t even exist.
I managed to get an original from a good friend of mine off his ’78 and had it reproduced. It was very expensive to have all the tooling done and manufacturing. I realize they are a little pricey, but I spoke to several owners and they all seemed to think that this was a fair price. This is a hobby for me. I’m not looking to get rich, just trying to recoup my costs and make a few bucks to buy more parts.
Those of you who have seen the Turbo stripes I made, you know how OCD I am. It has to be perfect. These came out great.
$48 a pair shipped CONUS
Thanks,
Tom
I am in need of these for my 78 930. I realize your post is old but do you still have them for sale?
Thank you
David
Last edited by David Navon; 01-27-2019 at 07:38 PM.
01-28-2019, 01:16 PM
#18
Rennlist Member
Thread Starter
Join Date: Dec 2003
Location: Valencia, Ca.
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
04-24-2020, 03:22 PM
#20
Rennlist Member
Thread Starter
Join Date: Dec 2003
Location: Valencia, Ca.
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
05-03-2020, 12:28 AM
#22
Drifting
It's funny timing I just dug mine out that I purchased from Tom in 2016 - I need to install them in my 76 which I drove for the first time in 6 months today.
Phil
Phil
The following users liked this post:
Cobrajohn (05-03-2020)
05-03-2020, 12:48 AM
#23
That's funny. I purchased my 76 at the end of December and have put a total of 30 miles on it between different restoration projects. Enjoy
Yesterday, 05:14 PM
#26
2nd Gear
Join Date: Sep 2008
Location: Dayton, OHio
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Engine Cover Bumpers
Hello Tom,
Do you still have engine cover bumpers forsale? I would love to buy a set for my early 1979 930.
thank you,
Joseph Augustine
hello
Do you still have engine cover bumpers forsale? I would love to buy a set for my early 1979 930.
thank you,
Joseph Augustine
Posted this on Pelican also.
The rubber bumpers that support the rear lid on 930’s from 1975-1978. Yours are probably missing or if you still have them, they are hard and brittle. They can be installed on later years also.
Here’s the deal on these. I have a ’78 930. The rubber bumpers on my car were missing so I set out to find a pair. Not only could I not find replacements, I couldn’t even find a part number or even the part in the PET. It was like it didn’t even exist.
I managed to get an original from a good friend of mine off his ’78 and had it reproduced. It was very expensive to have all the tooling done and manufacturing. I realize they are a little pricey, but I spoke to several owners and they all seemed to think that this was a fair price. This is a hobby for me. I’m not looking to get rich, just trying to recoup my costs and make a few bucks to buy more parts.
Those of you who have seen the Turbo stripes I made, you know how OCD I am. It has to be perfect. These came out great.
$48 a pair shipped CONUS
Thanks,
Tom
The rubber bumpers that support the rear lid on 930’s from 1975-1978. Yours are probably missing or if you still have them, they are hard and brittle. They can be installed on later years also.
Here’s the deal on these. I have a ’78 930. The rubber bumpers on my car were missing so I set out to find a pair. Not only could I not find replacements, I couldn’t even find a part number or even the part in the PET. It was like it didn’t even exist.
I managed to get an original from a good friend of mine off his ’78 and had it reproduced. It was very expensive to have all the tooling done and manufacturing. I realize they are a little pricey, but I spoke to several owners and they all seemed to think that this was a fair price. This is a hobby for me. I’m not looking to get rich, just trying to recoup my costs and make a few bucks to buy more parts.
Those of you who have seen the Turbo stripes I made, you know how OCD I am. It has to be perfect. These came out great.
$48 a pair shipped CONUS
Thanks,
Tom
hello
Yesterday, 11:23 PM
#27
