Official 930 --> 935 'RSR' Project
#211
Race Car
Thread Starter
Join Date: May 2005
Location: Being censored by a Moderator
Posts: 4,074
Likes: 0
Received 1 Like
on
1 Post
Hey Brian! The 951 is on hold until I can meet with the frame guys in North Carolina and get all the details sorted around early December. From there they'll get cracking and have the car done in a few months.
#212
Ohhhhhhh...I can't wait to see what YOU have up your sleeve next!
Brian
#213
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Brian, Guns has waaaay to many toys as we know. This 935 is just amazing! Every time I look at this and see new updates, I am just amzed at what a modern beast he is creating!!
#214
Brian
#215
Race Car
Thread Starter
Join Date: May 2005
Location: Being censored by a Moderator
Posts: 4,074
Likes: 0
Received 1 Like
on
1 Post
Partial Update
Partial update, Porsche Motorsport steering wheel goes on with quick release & North Hollywood Speedo gauges.
We'll soon have the gauges in the car, but here are some pics, just got the shot of the gauges from Hartmut, and he is a wonderful guy to work with.
Shot showing the dish, I have short arms so this will work well. The gauges shown in the car are not my gauges...
The dash is going to be freshened as well, all in due time.
Look ma! No wheel!
Alcantara's don't match well - might have to reupholster the seats.
Gauge Shot...just beautiful. These are the guages redone from original ones that Hartmut created for me, he did a FANTASTIC job! Great guy to work with.
We'll soon have the gauges in the car, but here are some pics, just got the shot of the gauges from Hartmut, and he is a wonderful guy to work with.
Shot showing the dish, I have short arms so this will work well. The gauges shown in the car are not my gauges...
The dash is going to be freshened as well, all in due time.
Look ma! No wheel!
Alcantara's don't match well - might have to reupholster the seats.
Gauge Shot...just beautiful. These are the guages redone from original ones that Hartmut created for me, he did a FANTASTIC job! Great guy to work with.
#222
Gabe, I was wondering what happened to you so I did a search and look what I've found! Been busy I see. Great work, I can't wait to see a picture with finished versions of both the BlackBird and 951 side by side.
#223
Race Car
Thread Starter
Join Date: May 2005
Location: Being censored by a Moderator
Posts: 4,074
Likes: 0
Received 1 Like
on
1 Post
Thanks Solo...the GTR will be up and going again soon once we get the aero testing done... but for now :
Wing progress...
Cardboard Templates (red line is revision)
Misc. Pics
Wing progress...
Cardboard Templates (red line is revision)
Misc. Pics