Fabspeed dual w/Tial 46mm WG?
#1
Race Car
Thread Starter
Fabspeed dual w/Tial 46mm WG?
Will be receiving my Fabspeed dual style exhaust anytime. Now the right side is straight from the muffler out but the left side is from the wastegate. Now I'm using the Tial 46mm wastegate so will any of you'l know if the left side tailpipe is a direct bolt on to the tial wg? The reason I ask is because the stock wg is bigger in size comparing to the Tial wg.
#2
Drifting
I think it should be fine. I'm pretty sure the driver side Fabspeed exhaust tip/pipe (waste gate dump tube) has some adjustability in it to assist with installation and proper alignment. Be advised, though, that I don't own a Fabspeed, I'm basing my coments on what I've seen on their website and short videos.
Jeff
Jeff
#3
Rennlist Member
The stock WG is physically larger and heavier than the 46mm TiAL but the exhaust port and the orientation and the way it sits on the header is identical, so on other words you will zero issues.
Yasin
Yasin
#6
Sameer,
The Fabspeed dual outlet muffler, Tial wastegate and B&B headers are a good combination. I have been running this exact setup for nearly 2 years and I absolutely love it. Installation should be straightforward. Sand_man is correct in stating that the wastegate outlet pipe is adjustable so that you can align it to the cutouts in your rear valence. The muffler exit on the right-hand side also has a slip fitting for this same purpose. The Tial wastegate is not an issue as it's ports are identical to the original in size and placement.
Cheers,
Brian
The Fabspeed dual outlet muffler, Tial wastegate and B&B headers are a good combination. I have been running this exact setup for nearly 2 years and I absolutely love it. Installation should be straightforward. Sand_man is correct in stating that the wastegate outlet pipe is adjustable so that you can align it to the cutouts in your rear valence. The muffler exit on the right-hand side also has a slip fitting for this same purpose. The Tial wastegate is not an issue as it's ports are identical to the original in size and placement.
Cheers,
Brian
Trending Topics
#9
The turbo sump tank is actually a GHL unit. I bought DonE's used B&B headers after he got his Marco Manzie setup, and Stephen at Imagine Auto hooked me up with a GHL sump tank for a reasonable price. The GHL and B&B sump tanks are nearly identical from what I can tell.
Best regards,
Brian
Best regards,
Brian
#14
Rennlist Lifetime Member
Sure I would come up with something. I would have to look back but I think the deal was 7 poeple. I will need to see what we blew them out for. So lets get a count. The more we get the better deal I get, therfore you get.