Beaky

Hi Folks,
I wonder if anyone can help, I have just acquired a set of Tear Drop mirrors for my 1986 Euro Carrera, but need some help on the wiring mapping as the mirror side has 5 wires, but the car side 6 wires as follows

Driver Side Mirror end:
Brown
Black/Blue
Grey/Green
White/Red
Black/Red

Drivers side car end:
Brown White
Green & Green/White (loop)
2 x White/Green (loop)
2 x Browns
Grey/Green
Black

Passenger Side Mirror end:
Brown
Grey/Blue
Grey/Green
White/Red
Black/Blue

Drivers side car end:
White/Blue
Green & Green/White (loop)
White/Green (loop)
Brown
Grey/Green
Black/Blue

Thanks in advance

wildcat077

Go on the Pelican 911 forums,somebody posted a wire conversion chart ... i have the 993 electric mirrors on my 89 but i never bothered to wire them up !

Cheers
Phil

Beaky

Finally worked out the solution, here's goes:

wildcat077

Beaky,

Thank you for posting your results,i might attempt to connect my wiring this Summer.The wiring discrepancies might be due to the heated mirrors on some models ...
Let us know if the connections work !


Cheers
Phil

Beaky

Worked a treat, you just need to remember to ignore/eliminate the loop as follows:

Driver’s side
White/Brown = Blue/Red
*Green & White/Green = White/Red
2 x Brown = Brown
Grey/Green = Grey/Green
Black = Black Blue
* Can be 2 x Black/Brown instead of Green & Green White

Passenger side:
White/Blue =Grey/Blue
Green = White/Red
Brown = Brown
Grey/Green = Grey/Green
Black/Blue = Black/Blue