john#6

trying to repair inoperable driver's side window, am finding it nearly impossible to remove door lock **** without really screwing it up - hasn't been off since new in '87 - any suggestions?

Cali_Jeff

I think you have to pop off a little cap covering the screw holding it on. Use a really small screw driver to pop the cap off.

Regards,
jeff

davis911s

Just be careful with the little cap so you don't damage it. When the cap is off, sometimes the screw is a bit tight too, just hold the handle and it will come off, just use the right screwdriver so you don't strip the screw.

Shawn

john#6

D'oh! Face of **** is a cap that pops right off, with a phillips screw underneath - I thought that the **** was all in one piece - Thanks you guys!