3.2 idle speed adjustment
08-15-2008, 07:40 PM
#16
Racer
Thread Starter
Join Date: May 2008
Location: Sierra Foothills, CA
Posts: 366
Likes: 0
Received 22 Likes
on
12 Posts
Ned, you were right on the money! My idle control microswitch was not making contact with the throttle arm. I made a slight adjustment to the metal tab that contacts the switch and that did the trick. My motor idles nicely now at about 850 rpm. As a sideline, while adjusting the microswitch I discovered that the clamp that secures the rubber intake boot to the throttle body was obstructing the last quarter inch of throttle travel.............Free Horsepower!!!
08-16-2008, 09:56 PM
#18
Rennlist Member
I had a similar issue with that damned clamp/screw,..actually caused the throttle to stick (but only once...) She's positioned properly now...I was amazed at the extro ooomph!!!!!!!!!!!
Best,
Doyle
Best,
Doyle
