rberry951

spence I have no problem shipping to australia, I ship 944/951 chips there all the time. But I'm not shipping these out until right around the 15th, which means you wouldn't get it until after your transformation. Otherwise, you would have gotten one.

Regards,
Russell

spence88mph

Ahhh cheers Russell, It's going on the dyno next week for a baseline before the install, I could have done a couple of runs and seen what the chip changed. Best of luck with the chips, I think you're making the right marketing move, no one will buy the unknown and there's no power like word of mouth.

Amber Gramps

Russell, on friday I was trying to figure out fuel cost for my Astro vs. my 911 and I came up with the same cost per mile. It's right at 22 cents per mile. As you may have read I have a VP Racing gas station by my office and I have been mixing about 25% 100 octane with the 91 octane. it figures out to be the same as what it costs me to drive my Chevy when you figure that the 911 gets much better milage than the chevy. Now to really **** off the locals...it's a wright off 'cause I had to drive it for work. the diduction is something like 30 cents a mile....so I'm getting paid to drive my 911 by the U.S. government. O.K. so I'm only getting credited for driving it, but it feals the same.....

Amber Gramps

what did I miss?

SpartanToJo

Spence,

I have nothing against Australia OR Australians. Hell, I'm half Australian!

I was just saying that shipping charges to Michigan are less than to Australia; saving Russell some cash.

That said, I AM a jerk. I just wasn't trying to be a jerk THIS time.

LUCKe27

I am definitely interested, but I don't even know where to look for a chip (just got my first p-car 3 weeks ago). My guess is that my chip is stock, but you never know until you look I guess.

p.s. I'd be happy to compare your chip to my stock chip and I carry (cough, cough) a lot of weight around here.

Amber Gramps

Luck, you will find your chip under your driver's seat. You've gotta remove five bolts to get the seat out then four nuts to remove the silver Motronic box and one nut on the cable. If you flip the box over you should be able to see scratches around the tabs on the perimeter of the box. Before opening=no scratches/ after opening=scratches. that should tell you without going all the way into the box.

flatsixnut

I cant find it in my SC.............JK!

Amber Gramps

I figured most guys were gonna get lost at the 5 bolts on the seat. Pissed me off for a minute or two....

yogi

If you put your seat all the way back you should be able to do it without removing the seat.

flatsixnut you need to just keep looking. lol

Jerry Baer
87 911 coupe

Amber Gramps

yogi, where were you last night? I'm thinking the nuts are gonna be a killer to put back in.. I had the seat all the way up and back then up and forward, but didn't think I could get to the box without removing the seat. oh, well....

spence88mph

lol!

SpartanToJo

Buy you a cold beer next time I'm in Melbourne?

spence88mph

yeah mate, always up for beers!

ne ohio 911

Russell, I recently installed one of Steve's chips. If you have not received five responses yet, I'd like the opportunity to do an unbiased comparison of the two products.