Where to start??
#1
Instructor
Thread Starter
Join Date: Apr 2003
Location: Upstate New York
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Where to start??
My 1982 SC needs the following:
The front crossmember thingy (cracked and I have a replacement), master cylinder, steering rack and front rotors, pads and tie rods. Rear needs CV joints. I imagine a tear down and start from the master cylinder and rack and work outward? I can then see me doing torsion bars, sway bars..etc while it's apart. Any advice on a potential pitfall?
The front crossmember thingy (cracked and I have a replacement), master cylinder, steering rack and front rotors, pads and tie rods. Rear needs CV joints. I imagine a tear down and start from the master cylinder and rack and work outward? I can then see me doing torsion bars, sway bars..etc while it's apart. Any advice on a potential pitfall?