Alignment Opinion?
#1
Thread Starter
Instructor
Joined: May 2001
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
From: Palm Beach Gardens, FL
Alignment Opinion?
OK. . . so I got the car back together after the "curb" incident at last week's autocross. . . New A-arm, ball joint and re-align/balance. Luckily the spindel wasn't bent. Here's the specs on the alignment/corner balance:
Total Weight with driver (155lbs) and 3/4 tank of fuel = 2974 - heavier than I had hoped.
Balance as follows:
LF - 609
RF - 599
LR - 912
RR - 855
Front Camber @ -1.4, Toe @ 12'
Rear Camber @ -1.3, Toe @ 18'
Looking forward to the Yoko AO32Rs (heat cycled) to mount on the 16x7/9s for the Track day April 13 @ Road Atlanta.
Any locals participating/attending?
Total Weight with driver (155lbs) and 3/4 tank of fuel = 2974 - heavier than I had hoped.
Balance as follows:
LF - 609
RF - 599
LR - 912
RR - 855
Front Camber @ -1.4, Toe @ 12'
Rear Camber @ -1.3, Toe @ 18'
Looking forward to the Yoko AO32Rs (heat cycled) to mount on the 16x7/9s for the Track day April 13 @ Road Atlanta.
Any locals participating/attending?