Notices
911 Forum 1964-1989
Sponsored by:
Sponsored by: Intercity Lines, LLC

Best oils for SOCAL 3.2 w/G50

Thread Tools
 
Search this Thread
 
Old 11-11-2005, 06:16 PM
  #1  
hanzonn
Advanced
Thread Starter
 
hanzonn's Avatar
 
Join Date: Nov 2002
Location: Stuttgart, Germany
Posts: 62
Likes: 0
Received 0 Likes on 0 Posts
Default Best oils for SOCAL 3.2 w/G50

Greetings,

I'm getting ready to change all the oils in my Carrera ('89 3.2 w/G50). I live in San Diego and am looking for recommendations for oils, both engine and tranny. I get a little grinding going into 3rd gear and hope this may remedy the problem.

And as far as engine oil - 20W-50? 10W-40? Valvoline? Castrol? Pennzoil? Kendall? Are they all the same?

Thanks, Greg
Old 11-11-2005, 06:22 PM
  #2  
ked
Addict
Rennlist Member

 
ked's Avatar
 
Join Date: May 2001
Location: Hsv AL
Posts: 3,495
Likes: 0
Received 2 Likes on 2 Posts
Default

search the archives on engine oil & transaxle oil. there is a TON of info already there, all still valid. for one, I have a '87 & use Mobil1 in both. cheers!
Old 11-11-2005, 08:45 PM
  #3  
Edward
Addicted Specialist
Rennlist Member
 
Edward's Avatar
 
Join Date: Jun 2001
Location: So.CA
Posts: 6,138
Received 358 Likes on 200 Posts
Default

As Ked mentioned, the archives have loads on this. In short, for SD, I'd definitely stick with a 20w/50. I use Kendall GT1 (dino oil) on the recommendation of more than a few of the pro gurus. But mine is a track car. Were it a street car (as the Kendall is a pain to locate), I'd use Castrol GTX as it's inexpensive and good stuff. If the car already has synthetic and you're not leaking, use Mobil 1. But if using dino, I'd continue to use dino. As for tranny, I'd use Mobil 1 (synthetic) in 75w/90. Great stuff ...may not "fix" your grinding, but it is good oil.

Edward
Old 11-11-2005, 09:08 PM
  #4  
imcarthur
Addict
Rennlist Member

 
imcarthur's Avatar
 
Join Date: Feb 2003
Location: Land of the Ptarmigan
Posts: 1,709
Likes: 0
Received 1 Like on 1 Post
Default

I'm far from an expert, but I've read all the posts . . .

Castrol GTX for dino & Mobile 1 for synthetic consistently get the nod.

For transmission Mobile 1 or Redline NS (for non LSD) seem to be popular.

Ian
Old 11-12-2005, 01:43 AM
  #5  
Lorenfb
Race Car
 
Lorenfb's Avatar
 
Join Date: May 2003
Location: SoCal
Posts: 4,045
Likes: 0
Received 61 Likes on 54 Posts
Default

Listen to Edward. He's right on. Unless syn is called for, don't waste your money.
Old 11-12-2005, 02:57 AM
  #6  
pgrunwald
Instructor
 
pgrunwald's Avatar
 
Join Date: Apr 2004
Location: Albuquerque, NM
Posts: 111
Received 1 Like on 1 Post
Default

I have an '87 w/ 66K. I use Mobile 1 in the transmission w/ LSD and Castrol Syntec Blend 20-50 in the motor.

I don't know what was in the tranny before I changed it but it got better with the Mobile 1.

If you watch the Pep Boys or Checker sales you can pick up the Syntec Blend for $2.00/qt. At $2.00/qt it is cheap enough to change frequently and the blend does run a slight bit cooler than the regular Castrol based on my un-unscientific observations after some track sessions.


Paul

------------------
'87 Targa
Old 11-12-2005, 02:33 PM
  #7  
scottb
Burning Brakes
 
scottb's Avatar
 
Join Date: Sep 2002
Location: Southern California
Posts: 814
Likes: 0
Received 3 Likes on 3 Posts
Default

On the reccomendation of a knowledgeable mechanic, I run Kendall dino in my engine.

I run Swepco in the transmission.

If you're grinding in third, try adjusting your coupler. If that doesn't help, replace all of your bushings (end of the shift rod, hanger, and coupler). If that doesn't help, unfortunately your tranny may be telling you it's time for a rebuild.

Good luck.

Scott
Old 11-22-2005, 05:50 AM
  #8  
rnln
Burning Brakes
 
rnln's Avatar
 
Join Date: Nov 2005
Location: CA
Posts: 798
Likes: 0
Received 0 Likes on 0 Posts
Default

Hi,

I am new to Porsche, just bought my 1988 64k on the clock. Engine running strong and no leak but I still decide to use 20/50 as always due to the "enhance leak" issue of synthetic. I had bad experience on my previous car, BMW. It had around 100k without leak (sure it was going to leak but not yet). After I switch to M1 synthetic, it leak bad. I switch back right away, doesn't stop the leak but it seem to slow down.
Now my 88 is "new" to me, unknown oil type the previous owner use. He doesn't even know, always bring it to the shop. Who know what the shop use. So I choose to go with 20/50 either Valvoline or Castrol because I always use them with good result and BMW dealer use them too.

Edward and others,

I have a question on tranny fluid. Since you agree to use mineral 20/50 on the engine, not synthetic do to the "enhance leak", why should we use synthetic 75/90, why not also use the non-synthetic 75/90 or 75/140?

Also for clutch fluid, any specific type or any "clutch fluid" at autopart stores is fine?

Thanks.
Old 11-22-2005, 10:28 AM
  #9  
RicoJay
Intermediate
 
RicoJay's Avatar
 
Join Date: May 2004
Location: TN
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Default

What about for winter driving a 911? Are we still advising 20W-50 non-synthetic engine oil if you consistently start the car in the winter at temps around 30 degrees F?
Old 11-22-2005, 01:38 PM
  #10  
pgrunwald
Instructor
 
pgrunwald's Avatar
 
Join Date: Apr 2004
Location: Albuquerque, NM
Posts: 111
Received 1 Like on 1 Post
Default

Originally Posted by rnln

Also for clutch fluid, any specific type or any "clutch fluid" at autopart stores is fine?

Thanks.
There is no separate clutch fluid system. The brake and clutch all come off of the main brake reservoir. I like ATE Superblue/Gold.


Paul
--------------------
'87 Targa
Old 11-22-2005, 02:10 PM
  #11  
ked
Addict
Rennlist Member

 
ked's Avatar
 
Join Date: May 2001
Location: Hsv AL
Posts: 3,495
Likes: 0
Received 2 Likes on 2 Posts
Default

RicoJay, there is a good write-up & chart in your owner's manual that addresses the oil grades appropriate for various ambient temp ranges. I believe that for starting temps regularly below 30F (but above 20F), it's ok to stay w/ a 20W (as in 20W-50), but one can change to a 15W- or 10W-, too. Here in the South, I run 15W-50 synth year 'round in my '87. Cheers!
Old 11-22-2005, 07:34 PM
  #12  
LaughaC
Burning Brakes
 
LaughaC's Avatar
 
Join Date: Jul 2005
Location: Nashville x-burbs
Posts: 955
Received 2 Likes on 2 Posts
Default

This is a good thread. I will launch another thread asking how often to change my trans oil.
Old 11-23-2005, 06:33 PM
  #13  
rnln
Burning Brakes
 
rnln's Avatar
 
Join Date: Nov 2005
Location: CA
Posts: 798
Likes: 0
Received 0 Likes on 0 Posts
Default

pgrunwald,

huh? one resevoir for both brake and clutch? That mean it's as simple as refil to the same resovoir and pump and bleed the clutch. Then do the same for 4 brakes. Or is there any special order I have to follow? Such as pump brake once, and pump clutch once, right?
Old 11-23-2005, 06:43 PM
  #14  
S2TGART
Instructor
 
S2TGART's Avatar
 
Join Date: Sep 2005
Location: Vernon, CT
Posts: 112
Likes: 0
Received 2 Likes on 1 Post
Default

The owner's manual for my '83 SC says 20W-50 is good for temps down to 20 f. Since here in CT it gets bitterly cold before we get actual snow, I put 15W-40 in for the Fall/pre-salt days of winter. I plan on driving it until the salt gets put on the road. Come Spring, I will put in 20W-50.
Old 11-23-2005, 09:48 PM
  #15  
rnln
Burning Brakes
 
rnln's Avatar
 
Join Date: Nov 2005
Location: CA
Posts: 798
Likes: 0
Received 0 Likes on 0 Posts
Default

S2Tgard,
15 insteat of 20 for the low temp, then why not go down all the way to 5w or 10w instead of 15w?
Thanks.


Quick Reply: Best oils for SOCAL 3.2 w/G50



All times are GMT -3. The time now is 02:11 PM.