Machine work
Thread Starter
Instructor
Joined: Jul 2004
Posts: 122
Likes: 0
From: NJ
Machine work
Well, I am going to pick up my machine work this weekend for my 911SC. Now I'm just curious, did I get a good deal?
Flywheel resurfaced
Connecting rod job
P&C's measured
Head job (valve guides, etc.)
Crank polished and measured
About $800. How did I fare?
Flywheel resurfaced
Connecting rod job
P&C's measured
Head job (valve guides, etc.)
Crank polished and measured
About $800. How did I fare?
Addict
Rennlist Member
Rennlist Member
Joined: Feb 2004
Posts: 882
Likes: 0
From: SW Ontario canada
Prices probably differ in Canada, but I'd say that was quite fair for good work. I paid about $CDN 450 for a complete head rebuild with me supplying the parts and reamer.
Others will have a better picture of the local market in your area.
Others will have a better picture of the local market in your area.
Thread Starter
Instructor
Joined: Jul 2004
Posts: 122
Likes: 0
From: NJ
Turned out the work was 1050. I left something out in my addition. The work appears to be pretty good, but I won't know until assembly, or more likely, until it runs! Still, not a bad price I think.
