11GT3RS Roll Bar or Rear Cage
#1
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Just wondering what are the latest suggestions/recommendations for the GT3RS.
I have looked at Carnewal site for the Porsche OEM Tequipment and have searched some previous posts representing GMG, RSS and DAS.
thanks in advance
I have looked at Carnewal site for the Porsche OEM Tequipment and have searched some previous posts representing GMG, RSS and DAS.
thanks in advance
#3
Rennlist Member
Join Date: May 2008
Location: Somewhere in a galaxy far, far away....
Posts: 17,108
Likes: 0
Received 259 Likes
on
173 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
go out of your way and order the porsche motorsports bar from FVD. wouldnt hurt to order the front half either.
if you only need a harness bar, then porsche tequipment.
the more OE you keep your car, the better the resale.
if you only need a harness bar, then porsche tequipment.
the more OE you keep your car, the better the resale.
#4
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Just got the GMG RSR bar installed and am very satisfied with the fit, finish and material. It feels rock solid and super strong. Mounts to the rear shock mounts like the OEM and to the seat belt in front bottom. Understand what others say regarding the welded floorbracket/ front mount with OEM bar, but it would take a whole hell of a lot of trauma to rip out a GMG bar. Gotta give more protection than the tequipment harness bar in any event. Has anyone here rolled or know someone that rolled a car with a GMG, DAS sport or RSS bar and lived to tell about it? It would be interesting to see some FE analysis on the difference between the mounts. Any engineers out there?
#6
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
All of the other bars look and feel fine. I don't risk safety
The only better bar than. Clubsport is a welded in bar.....like tcd
Trending Topics
#8
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
DAS in Cro-Moly.
www.dassport.com
Beefy (lighter in cro-mo) and excellent design (triangles, stout feet.)
Full range of motion for the driver seat.
Weld-in full cage is an option.
Personally, I don't like all the bolts in the factory bar (especially next to the driver's head.)
www.dassport.com
Beefy (lighter in cro-mo) and excellent design (triangles, stout feet.)
Full range of motion for the driver seat.
Weld-in full cage is an option.
Personally, I don't like all the bolts in the factory bar (especially next to the driver's head.)
#9
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
This is the Clubsport bar in the rear. It can be extended forward. More pics if you click on my signature on the bottom.
You'll have to get plates welded on the floor, like the cars have from the factory when you order the club sport package (Not avail. un US).
You'll have to get plates welded on the floor, like the cars have from the factory when you order the club sport package (Not avail. un US).
#10
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
TRAKCAR,
Nice pics. Really looks strong with the 3 bolt mounting plate in the floor. I noticed the top seat bealt covers, and should mention that was one thing about the GMG bar, it fits so tight that is that there is not enough room to re-install the covers. Not really noticeable unless you are looking for it.
Nice pics. Really looks strong with the 3 bolt mounting plate in the floor. I noticed the top seat bealt covers, and should mention that was one thing about the GMG bar, it fits so tight that is that there is not enough room to re-install the covers. Not really noticeable unless you are looking for it.
#11
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Just got the GMG RSR bar installed and am very satisfied with the fit, finish and material. It feels rock solid and super strong. Mounts to the rear shock mounts like the OEM and to the seat belt in front bottom. Understand what others say regarding the welded floorbracket/ front mount with OEM bar, but it would take a whole hell of a lot of trauma to rip out a GMG bar. Gotta give more protection than the tequipment harness bar in any event. Has anyone here rolled or know someone that rolled a car with a GMG, DAS sport or RSS bar and lived to tell about it? It would be interesting to see some FE analysis on the difference between the mounts. Any engineers out there?
NO; seats, roll bar, harness. Car was totalled. driver and passenger walked away. The car was bone stock and new to the owner. The first two rolls were of the (a corner of the car touched the ground and the other 3/4 of the car was airborn) tumbling variety. The passenger compartment was very intact. Any roll bar could make an improvment.
#12
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
TRAKCAR,
Nice pics. Really looks strong with the 3 bolt mounting plate in the floor. I noticed the top seat bealt covers, and should mention that was one thing about the GMG bar, it fits so tight that is that there is not enough room to re-install the covers. Not really noticeable unless you are looking for it.
Nice pics. Really looks strong with the 3 bolt mounting plate in the floor. I noticed the top seat bealt covers, and should mention that was one thing about the GMG bar, it fits so tight that is that there is not enough room to re-install the covers. Not really noticeable unless you are looking for it.
#13
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I saw a 997 GT3 barrel roll three times and land on its wheels at a DE.
NO; seats, roll bar, harness. Car was totalled. driver and passenger walked away. The car was bone stock and new to the owner. The first two rolls were of the (a corner of the car touched the ground and the other 3/4 of the car was airborn) tumbling variety. The passenger compartment was very intact. Any roll bar could make an improvment.
NO; seats, roll bar, harness. Car was totalled. driver and passenger walked away. The car was bone stock and new to the owner. The first two rolls were of the (a corner of the car touched the ground and the other 3/4 of the car was airborn) tumbling variety. The passenger compartment was very intact. Any roll bar could make an improvment.
#14
Still plays with cars.
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Izzone - not sure where you get your info but the stainless steel Tequipment bar for the 996 GT3 and then the 997 was part of the original Porsche Clubsport package. I can assure you that it has proven to be safe since sadly GT3's account for 1/3 of the incidents at PCA DE and we have seen many roll overs. The bar does its job. Do you honestly think Porsche would take the liability risk? I really wonder who starts these rumors!!
The 997.2 RS is a half or full cage and requires plates welded to the floor on North American cars. I would not let anyone weld plates inside my car. At manufacture as a bare chassis, of course, but once finished, no way - but that's me. Other bolt in bars use the same mounting points and I prefer OEM given the choice.
Regards,
The 997.2 RS is a half or full cage and requires plates welded to the floor on North American cars. I would not let anyone weld plates inside my car. At manufacture as a bare chassis, of course, but once finished, no way - but that's me. Other bolt in bars use the same mounting points and I prefer OEM given the choice.
Regards,
The following users liked this post:
Brian Himmelman (08-11-2023)
#15
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hey great input guys..keep it coming![rockon](https://rennlist.com/forums/graemlins/rockon.gif)
A special mention of thanks to Bob Rouleau who has been supporting so many of my RS questions.
A Happy and Safe New Year to all.
![rockon](https://rennlist.com/forums/graemlins/rockon.gif)
A special mention of thanks to Bob Rouleau who has been supporting so many of my RS questions.
A Happy and Safe New Year to all.
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)