Jim Dillard's 2022 Porsche Spyder in Gentian Blue just arrived at PON ...
The following 11 users liked this post by tigerhonaker:
AtoB (08-15-2022),
drgav2005 (08-18-2022),
Fdvigna (08-15-2022),
fueledbymetal (08-15-2022),
JBM718GTS (08-16-2022),
and 6 others liked this post.
The following 2 users liked this post by C2 Turbo:
jimdillard (08-15-2022),
tigerhonaker (08-15-2022)
#3
Love the no holes sign! I would do the same.
The following 2 users liked this post by Randy_B:
jimdillard (08-15-2022),
tigerhonaker (08-15-2022)
#4
Rennlist Member
Thread Starter
C2 Turbo,
That's not my 2022 Porsche Spyder.
It's Jim Dillard's new Spyder I just did the pictures of it last evening for him.
Jim is on the Left in picture.
That's my GT4 in the Racing Yellow in picture.
Hi Randy,
I did that Sign for Jim Dillard when I drove over last evening to check the Spyder out for him.
I live maybe 10-miles from Porsche of Nashville.
It's a Super Nice Machine,
Terry
That's not my 2022 Porsche Spyder.
It's Jim Dillard's new Spyder I just did the pictures of it last evening for him.
Jim is on the Left in picture.
That's my GT4 in the Racing Yellow in picture.
Hi Randy,
I did that Sign for Jim Dillard when I drove over last evening to check the Spyder out for him.
I live maybe 10-miles from Porsche of Nashville.
It's a Super Nice Machine,
Terry
Last edited by tigerhonaker; 08-15-2022 at 09:31 AM.
The following 4 users liked this post by tigerhonaker:
The following users liked this post:
Randy_B (08-16-2022)
#6
Rennlist Member
I had an e-mail from Porsche NA this morning inviting me to add the Spyder to my "My Porsche" account. After a verification text, etc, it appeared as one of my vehicles on "My Porsche," and had a PDF copy of the official Monroney Window Sticker which I've posted below.
The following 2 users liked this post by jimdillard:
SpyderSenseOC (08-15-2022),
tigerhonaker (08-15-2022)
#7
Rennlist Member
Now the real obsession starts. When every pic someone takes of your car makes you catch your breath...
The following 2 users liked this post by Adrift:
jimdillard (08-15-2022),
tigerhonaker (08-15-2022)
Trending Topics
#8
Drifting
Where did you get your side decals that say GT4? I've been trying to find them to buy for when my car arrives but the best I've been able to find are ones that just say Porsche
The following users liked this post:
jimdillard (08-15-2022)
#10
Rennlist Member
The following 3 users liked this post by jimdillard:
#11
Racer
I'm puzzled by the 'no drill' on the rear plate. Is that just because you want to do it--and make sure it's not off-center or too large? If not, are you just going to use double-sided tape to affix the plate?
...and AWESOME car! Lifetime keeper!
...and AWESOME car! Lifetime keeper!
#12
Rennlist Member
Thank you! Actually...a bit of both. I hate drilling bumper plastic, so purchased the C-A-R-P-O-K-E-S 3D-printed 718 license plate mounts that use the ULTRA-STICKY 3M double-sided tape for adhering to the flat rear license plate area. I've attached a few photos and a PDF of their instructions.
Last edited by jimdillard; 08-16-2022 at 08:21 AM.
The following users liked this post:
tigerhonaker (08-16-2022)
#13
Congratulations Terry,
‘My Wife and I are waiting for our new Spyder to arrive, we’re located up in BC Canada.
Carrara White and with a very similar build list to yours. Can’t wait!
🇳🇿🇨🇦
‘My Wife and I are waiting for our new Spyder to arrive, we’re located up in BC Canada.
Carrara White and with a very similar build list to yours. Can’t wait!
🇳🇿🇨🇦
Last edited by Rupert16; 08-16-2022 at 08:33 AM.
The following 2 users liked this post by Rupert16:
jimdillard (08-16-2022),
tigerhonaker (08-16-2022)
#14
Rennlist Member
Thread Starter
Thank you sir! I'm taking delivery tomorrow however, if their schedule allows, I'll be leaving my Spyder with PON Service Foreman Nick Gwozdz to perform some additional mods I'd like to get done, including adding the SOUL Resonated Ceramic-Coated OAP's and Cargraphic controller. When that's done it's over to the PPF/Ceramic shop so they can do their thing. The work never ceases...LOL...but I promise to post photos when she's all put back together and "streetable."
I might have gone with the SOUL Resonated OAP but actually didn't know about them until (After) my SOUL OAP with Jet-Hot 1300-degree ceramic coating were installed.
I know you have the Spyder where I have the Coupe but I'm still going to be interested to take a Long-Extended afternoon ride in your's to hear what it sounds like.
Oh, and to drop by the same Fairview Mexican Restaurant ........ Hint-hint
Terry
The following users liked this post:
jimdillard (08-16-2022)
#15
Rennlist Member
Jim Dillard,
I might have gone with the SOUL Resonated OAP but actually didn't know about them until (After) my SOUL OAP with Jet-Hot 1300-degree ceramic coating were installed.
I know you have the Spyder where I have the Coupe but I'm still going to be interested to take a Long-Extended afternoon ride in your's to hear what it sounds like.
Oh, and to drop by the same Fairview Mexican Restaurant ........ Hint-hint
Terry
I might have gone with the SOUL Resonated OAP but actually didn't know about them until (After) my SOUL OAP with Jet-Hot 1300-degree ceramic coating were installed.
I know you have the Spyder where I have the Coupe but I'm still going to be interested to take a Long-Extended afternoon ride in your's to hear what it sounds like.
Oh, and to drop by the same Fairview Mexican Restaurant ........ Hint-hint
Terry