GT4RS Deliveries and Production Discussion
#617
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Last edited by PorscheNut454; 10-30-2022 at 03:14 PM.
The following users liked this post:
greatfox315 (10-30-2022)
#618
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
From doing the factory, I can tell you it is either as a result of the fenders not being to their standards or the fenders not being ready in your colour. The Stuttgart production line doesn’t have the ability to stop and pull a car from the line. What likely is happening is they will finish the car full with the temp white fenders and then it will head over to Porsche Exclusive to have them swapped out.
#619
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
lol didn't even notice that on my own car! I guess that would explain why my car was in production for as long as it was.
#620
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
GT4 RS front wings are carbon fibre so may will be fitter away from the normal production line. More than likely in the CXX area of the factory.
#621
#622
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Mine was 9/21 to 10/24. That makes a lot of sense now. I initially thought it may have been an issue related to ordering parts related to the stop delivery others were experiencing.
The following users liked this post:
greatfox315 (10-30-2022)
#624
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Why is PDLS+ such a big deal? I had the option to select PDLS+ but didn’t specifically to keep weight down and reduce the cost of windshield replacements.
There’s a reason why the GT4RS Clubsport uses the base lights: weight savings.
There’s a reason why the GT4RS Clubsport uses the base lights: weight savings.
#625
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It might have something to do with the fact that the base lights look like they came out of a 2005 Golf - some don’t like the look.
The following 4 users liked this post by UncleDude:
#626
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
What isn’t an opinion is the weight of the two options.
#627
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
How did the weight saving radio and AC delete options work out for previous gen GT3 buyers? Not so much...
#628
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
That’s the cool thing with an option, you don’t have to get PDLS if you want to save some lbs.
The following users liked this post:
greatfox315 (10-31-2022)
#629
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I think on most cars you could get away with being less **** about weight. But when lightweight wheels are a $15,640 option, it makes sense to save weight where it’s free.
#630
![Default](https://rennlist.com/forums/images/icons/icon1.gif)