Spyder Graphics - on the fence - color choices - examples?
#1
Spyder Graphics - on the fence - color choices - examples?
I'm contemplating the thought of having graphics applied to my new Chalk Spyder, in a similar pattern to what was on my 981 Carrara White Spyder. I bought the 981 as a CPO car in San Diego and the graphics were already on the car when I bought it. But I liked them a lot. I thought they added some real character and made it unique and I thought they toughened up the look a bit. The 981 wasn't a GT car and it had a softer appearance than its GT4 counterpart.
Plenty of Chalk cars out there right now as that color/shade seems to have caught on lately. Even several Chalk with Aurum wheels. I want to set mine apart in the right way. The stripes on my 981 were a matte or satin black with a silver border and I thought they went very well with the Carrara White with black GT4 wheels. But I'm struggling to decide what accent color would complement my Chalk car without putting it over the top. I have Aurum wheels and the obvious option would be to try and match the gold tone. But I also don't want to make my car the Porsche equivalent to the 2003 Camry with the factory gold package. lol
Anyone here have or have seen a Chalk 718 with graphics that they thought looked good? Here's my 981:
Plenty of Chalk cars out there right now as that color/shade seems to have caught on lately. Even several Chalk with Aurum wheels. I want to set mine apart in the right way. The stripes on my 981 were a matte or satin black with a silver border and I thought they went very well with the Carrara White with black GT4 wheels. But I'm struggling to decide what accent color would complement my Chalk car without putting it over the top. I have Aurum wheels and the obvious option would be to try and match the gold tone. But I also don't want to make my car the Porsche equivalent to the 2003 Camry with the factory gold package. lol
Anyone here have or have seen a Chalk 718 with graphics that they thought looked good? Here's my 981:
Last edited by SpyderSenseOC; 07-20-2022 at 10:43 PM.
The following users liked this post:
jimdillard (06-20-2022)
#2
I would like to vote ‘no’ for the decals on the Spyder; the whole purpose of the car is to be more sleek and clean. With that said, I do like the side stripe decal with ‘Porsche’. Maybe a silver or white one would look more subtle on chalk.
The following 2 users liked this post by sin911:
jimdillard (06-20-2022),
sgreer78 (06-18-2022)
#3
I'm contemplating the thought of having graphics applied to my new Chalk Spyder, in a similar pattern to what was on my 981 Carrara White Spyder. I bought the 981 as a CPO car in San Diego and the graphics were already on the car when I bought it. But I liked them a lot. I thought they added some real character and made it unique and I thought they toughened up the look a bit. The 981 wasn't a GT car and it had a softer appearance than its GT4 counterpart.
Plenty of Chalk cars out there right now as that color/shade seems to have caught on lately. Even several Chalk with Aurum wheels. I want to set mine apart in the right way. The stripes on my 981 were a matte or satin black with a silver border and I thought they went very well with the Carrara White with black GT4 wheels. But I'm struggling to decide what accent color would complement my Chalk car without putting it over the top. I have Aurum wheels and the obvious option would be to try and match the gold tone. But I also don't want to make my car the Porsche equivalent to the 2003 Camry with the factory gold package. lol
Anyone here have or have seen a Chalk 718 with graphics that they thought looked good? Here's my 981:
Plenty of Chalk cars out there right now as that color/shade seems to have caught on lately. Even several Chalk with Aurum wheels. I want to set mine apart in the right way. The stripes on my 981 were a matte or satin black with a silver border and I thought they went very well with the Carrara White with black GT4 wheels. But I'm struggling to decide what accent color would complement my Chalk car without putting it over the top. I have Aurum wheels and the obvious option would be to try and match the gold tone. But I also don't want to make my car the Porsche equivalent to the 2003 Camry with the factory gold package. lol
Anyone here have or have seen a Chalk 718 with graphics that they thought looked good? Here's my 981:
The black will match your roof and all the plastics bits around the car.
Thin accent rim to match either wheel or interior.
But I think you can skip the middle one below the crest on the frunk.
The following 2 users liked this post by Dyim:
jimdillard (06-20-2022),
SpyderSenseOC (06-17-2022)
#4
I am just going to throw this idea out there: crowd source a graphic art designer. At a site like designcrowd.com, you can offer a few hundred bucks and you will have 100 designs in a week. Just google “crowd source graphic art”.
The following 4 users liked this post by Dan Nagy:
The following 2 users liked this post by 95spiderman:
jimdillard (06-20-2022),
SpyderSenseOC (06-17-2022)
#6
Yeah, I forgot about that. That little remnant is what was left over from "Porsche San Diego" being stenciled into the gap between the main stripes. They forgot to remove that little piece prior to delivery. But great suggestions. Thanks. I'm leaning toward Aurum accents but we'll see.
Last edited by SpyderSenseOC; 06-17-2022 at 12:34 PM.
The following users liked this post:
jimdillard (06-20-2022)
#7
Thanks. I agree about the rear stripes. They add more to the car than the front ones do, for sure. I also felt they accentuated the humps very well since the white paint kind of swallowed them up to a degree.
The following users liked this post:
jimdillard (06-20-2022)
Trending Topics
#8
Do you have red brakes, black brakes, or yellow PCCB?
Do you have CF trim?
What is the interior stitching?
All these matter to create an aesthetically cohesive car. And an aesthetically cohesive car will have a better overall "presence".
My vote would be a CF weave with border to match brake color it you have CF interior trim and red or yellow brakes
If you don't have CF trim, and have the exterior color matched interior trim, then go with matte black, again, with a border to match brake calipers if they are red or yellow. If black, go with a gold border to match the Aurum wheels.
Do you have CF trim?
What is the interior stitching?
All these matter to create an aesthetically cohesive car. And an aesthetically cohesive car will have a better overall "presence".
My vote would be a CF weave with border to match brake color it you have CF interior trim and red or yellow brakes
If you don't have CF trim, and have the exterior color matched interior trim, then go with matte black, again, with a border to match brake calipers if they are red or yellow. If black, go with a gold border to match the Aurum wheels.
#9
Do you have red brakes, black brakes, or yellow PCCB?
Do you have CF trim?
What is the interior stitching?
All these matter to create an aesthetically cohesive car. And an aesthetically cohesive car will have a better overall "presence".
My vote would be a CF weave with border to match brake color it you have CF interior trim and red or yellow brakes
If you don't have CF trim, and have the exterior color matched interior trim, then go with matte black, again, with a border to match brake calipers if they are red or yellow. If black, go with a gold border to match the Aurum wheels.
Do you have CF trim?
What is the interior stitching?
All these matter to create an aesthetically cohesive car. And an aesthetically cohesive car will have a better overall "presence".
My vote would be a CF weave with border to match brake color it you have CF interior trim and red or yellow brakes
If you don't have CF trim, and have the exterior color matched interior trim, then go with matte black, again, with a border to match brake calipers if they are red or yellow. If black, go with a gold border to match the Aurum wheels.
I’m leaning towards black with gold trim to match the wheels. I need to see how gold/Aurum looks on top of the chalk paint first. That’s really my worry.
Last edited by SpyderSenseOC; 06-17-2022 at 07:56 PM.
The following users liked this post:
jimdillard (06-20-2022)
#10
Shoot us a PM, we can always get together a few mockups to help you make some visuals. I would imagine you can include some Aurum as long as not too strong or overpowering design wise. I think it would overlay nicely on Chalk and create a nice effect. Perhaps a secondary color or ghosted grey could be cool?
The following 2 users liked this post by Carrara Design:
jimdillard (06-20-2022),
SpyderSenseOC (06-18-2022)
The following 2 users liked this post by c1pher:
sgreer78 (06-18-2022),
SpyderSenseOC (06-18-2022)
#12
Mmm, I’m not sure about stripes are for kids but I certainly knew the topic would be polarizing. And that’s the way it should be. I love the diversity of opinion when it comes to these works of art.
Last edited by SpyderSenseOC; 06-18-2022 at 12:00 PM.
The following 3 users liked this post by SpyderSenseOC:
The following 5 users liked this post by sgreer78:
c1pher (06-19-2022),
catdog2 (06-20-2022),
jimdillard (06-20-2022),
N3RVOUSGT4 (06-19-2022),
SpyderSenseOC (06-19-2022)
The following users liked this post:
jimdillard (06-20-2022)
#15
That pick-up truck is bitchin'; I'd like to offer $5K...no, make that $10K ADM. ()
...now back to topic, I am a fan of Spyder stripes (and Porsche striping in-general). My deep thoughts:
Fun post; and enjoy whatever you choose.
...now back to topic, I am a fan of Spyder stripes (and Porsche striping in-general). My deep thoughts:
- Porsche is the ONLY brand where I prefer when the stipes are body-panel specific (and not carried through from tip-to-tail).
- Part 2, I like combinations of hood-only, a hood + roof, or the three-pack hood, roof, tail.
- If you decide to start with rear-only, plan your design so you can easily add the hood at a later date. (I think you'll want to.)
- Big YES for designs which incorporate an outline around / into the main stripes.
- Consider choosing a subtle-color stripe that is in the same color-family as the car's paint (Just be that few shades darker or lighter than the body color).
- Match the metallic or non-metallic properties of your stripe to your paint. (For a Chalk car, my choice would be a non-metallic stripe.)
- Agree with others that the color of the secondary / border stripe matching another bit of the car is sweet; or choose a lighter / darker shade of the main stripe.
- Finally, make the secondary stripe slightly inset into the main stripe. (Check out photo below of a silver 981 Spyder with black stripe and red trimmer. (Solid artistry was done here; this ain't no 'Challenger / Mega-Mustang / Camaro Sticker Pack' job.)
Fun post; and enjoy whatever you choose.
The following 2 users liked this post by Bearrun21:
jimdillard (06-20-2022),
SpyderSenseOC (06-20-2022)