718 Spyder Racing Stripe
#2
Rennlist Member
I like that. A lot. Nicely done.
The following 2 users liked this post by Adrift:
Larry Cable (03-10-2022),
SpeedySpidey (03-10-2022)
#4
Rennlist Member
Nice. I like how you tied in the top color. I'm trying to come up with a scheme for my incoming Chalk with Aurum wheels Spyder. My old 981 below:
Last edited by SpyderSenseOC; 03-10-2022 at 07:23 PM.
The following users liked this post:
vision3030 (03-11-2022)
#5
Burning Brakes
[QUOTE=tfenton02;18022531]Just added a racing stripe to my Chalk Spyder. Turned out pretty cool
Very tasty. It takes your eye away from the wart on the trunk. Where did you get the racing stripe from?
Very tasty. It takes your eye away from the wart on the trunk. Where did you get the racing stripe from?
The following users liked this post:
Larry Cable (03-10-2022)
#6
Rennlist Member
Thread Starter
I went to a local company that does custom wraps and ceramic coating. We just used a gunmetal wrap (matches the wheel color) the a red pin stripe to match the soft top and they created the racing stripe. Also put a full front end wrap on with ceramic coat since I was there.
The following users liked this post:
2XIPA (03-11-2022)
Trending Topics
#10
Rennlist Member
Are your red stripes strips or did you just lay over the top of a large red panel with a slightly smaller silver one? I always believed that the ones on my 981 Spyder were silver graphics laid first, with the black on top of that. But I never actually confirmed one way or another.
Last edited by SpyderSenseOC; 03-10-2022 at 11:49 PM.
#11
Is your "Spyder" logo in the back the one from the 981 or 987?
Last edited by IRM; 03-10-2022 at 10:46 PM.
#12
Rennlist Member
Nicely done, it looks great.
#13
Rennlist Member
Thread Starter
Are your red stripes strips or did you just lay over the top of a large red panel with a slightly smaller silver one? I always believed that the ones on my 981 Spyder were silver graphics laid first, with the black on top of that. But I never actually confirmed one way or another.
#14
Rennlist Member
Thread Starter
Spyder logo was the OEM 718 Spyder logo, I just removed 718 to keep it cleaner
The following users liked this post:
IRM (03-12-2022)
#15
[QUOTE=2XIPA;18022559]I like the look in general, but have to admit it actually highlighted the wart to my eye.