When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm excited to see this because ATS makes very high quality wheels in Germany at very reasonable prices. Looking online briefly I don't see any US retailers for ATS. But in the EU, they sell a 20" Racelight set that meets the SCCA Street class sizing rules for only about $2200 for a complete set of 4 (8.5x20 +55mm and 11x20 +50mm)
Anyone know if there are any US retailers or distributors of ATS wheels left?
I have still have an old set of 15" ATS wheels in Miata fitments from 15+ years ago when TireRack used to carry the ATS brand. They were very light and had top quality finish,
Seriously? This is true? Does nothing fit over the PCCB’s. Well damn!
I guess I’ll just replace tires a lot then.
The BC Forged wheels I have do fit over the PCCBs. They are a tight clearance to be sure, with only a couple mm of clearance, but they do fit. Obviously if a rock were to get in between the caliper and the wheel, one or both would sustain some scratching.
While my car doesn't have PCCB, I did test fit my wheels on both a 718 Spyder and a 981 GT4, both with PCCB.
Again, I get nothing out of it, but if you're interested, PM me and I can give contact information for the guy that I ordered my wheels through.
My ATS wheels where front 8,5x19 ET49, rear 11x19 ET50.
Really happy with them, light weight at 9,6kg front. Price was also good at about 1500 usd for a set. Sold them to a GT4 owner
I picked up a used set of HRE wheels and tested them on my car today. I’m really loving the gold on red.
I had to change height and camber to -3.5 deg. After taking this pic, will update when I get spacers for the rear.
Litespeed racing RS5 Track Spec in Magnesium, very lightweight at 16lbs and 19lbs. 8.5x20 ET55 fronts, 11x20 ET50 rears, I ended up going very conservative for the front offset, given I am about to install camber plates I could definitely of gone more aggressive. Tires are stock size Cup2's but once they are dead I'll try AO52's or SC3's.
Litespeed racing RS5 Track Spec in Magnesium, very lightweight at 16lbs and 19lbs. 8.5x20 ET55 fronts, 11x20 ET50 rears, I ended up going very conservative for the front offset, given I am about to install camber plates I could definitely of gone more aggressive. Tires are stock size Cup2's but once they are dead I'll try AO52's or SC3's.
These are the track wheels I want for the 4RS....why not 20x9 up front so a slightly wider tire fits better bringing it on par with GT3?
I want to do them but in 19"....will also need to add the AP Brake Kit.
It would be a lot more helpful if people would also put in aspect ratio and offset. I mean, writing 275/305 or 265/285 doesn't help a lot if we don't know the aspect ratio. Same when people are not posting offsets.