Spyder rear emblem options
#1
Rennlist Member
Thread Starter
Spyder rear emblem options
I plan to check the rear emblem delete option and then just put “Spyder” back on after PPF. I’ve seen the 718 Spyder option on Suncoast (would just ditch the 718 part) but just wanted to see if I’m missing any other options that you’ve come across. Perhaps from other model years, different sizes, etc.
Thanks,
Jeff
Thanks,
Jeff
#2
Rennlist Member
I got the 987 version. Its a bit larger and only $55. will install this month after i get the car. Its matte black
The following 5 users liked this post by Rennolazine:
Charles Everson (08-28-2022),
DFW01TT (01-08-2021),
SpeedySpidey (01-07-2021),
TYPE911 (01-07-2021),
Yellow Submarine (01-07-2021)
#3
Rennlist Member
I did the model designation delete as well as the blacked out Porsche logo and will leave it that way. I like the stealth look, plus it’s easier to clean.
The following 7 users liked this post by Jay77:
Charles Everson (08-28-2022),
DFW01TT (01-08-2021),
Kansas32 (08-27-2022),
Mikey K (01-09-2021),
NeilF (01-07-2021),
and 2 others liked this post.
#5
#6
Rennlist Member
https://www.suncoastparts.com/produc...BoCdnEQAvD_BwE
The following 2 users liked this post by Rennolazine:
Charlie987 (05-05-2021),
DocMo (01-07-2021)
#7
Rennlist Member
Thread Starter
Thanks everyone for the insight, I knew the hive mind wouldn't disappoint!
I saw on Suncoast that they had both the 718 Spyder emblem as well as the much cheaper 987 version, I just wasn't sure about the size difference. A bit bigger would be a good thing I think and saving $100 is always a nice bonus. Matte black works just fine on the bumper.
I saw on Suncoast that they had both the 718 Spyder emblem as well as the much cheaper 987 version, I just wasn't sure about the size difference. A bit bigger would be a good thing I think and saving $100 is always a nice bonus. Matte black works just fine on the bumper.
Trending Topics
#9
I went this route and I'm afraid that adding SPYDER above it would be redundant. (As much as I like the black script on white.)
The following 2 users liked this post by DFW01TT:
F1_MWG (01-09-2021),
Jeff Jones (01-08-2021)
#10
Instructor
I took mine off for the PPF and didn't bother putting it back on
The following users liked this post:
Jeff Jones (01-09-2021)
The following 2 users liked this post by 42w203:
Charles Everson (08-28-2022),
Jeff Jones (01-10-2021)
#13
Rennlist Member
Anyone installed the larger 987.2 Spyder logo, with a photo?
Ordered my car without rear logo, debating between 9 x 1.5 Spyder logo, or the smaller 6.75 x 1.5 Spyder logo, sans 718 of course.
Ordered my car without rear logo, debating between 9 x 1.5 Spyder logo, or the smaller 6.75 x 1.5 Spyder logo, sans 718 of course.
#14
Burning Brakes
#15
On the headlight washers they would run afoul of cert regulations. If you don't like it buy the base ones and then replace'em with the ones you want.