The Official White and Carrara White Metallic Color Thread
#316
Drifting
The satellite antenna is functional and hidden away under some trunk panels...I'd never really know though, as you cannot hear anything over the exhaust. No idea about the inspection, but I suspect it won't be an issue in my state.
#317
Drifting
The OEM Spyder badges were removed and painted gloss black when the rear hatch had its bodywork done. I did not do any of the work so I have no idea if they were easy to remove.
The following 2 users liked this post by JAhmed:
DFW01TT (12-17-2021),
Spyder Bite (08-11-2021)
#318
Badges are simple to remove
Fishing line
Heat gun
Goo gone
heat it up, saw with the fishing line, remove leftover glue with the goo gone
putting it back on straight is the difficult part! SO make sure to make a tape template
Fishing line
Heat gun
Goo gone
heat it up, saw with the fishing line, remove leftover glue with the goo gone
putting it back on straight is the difficult part! SO make sure to make a tape template
#319
I know that is the typical method that I have used many times but didn't know if this location had posts or just 3M. Can you confirm?
#320
Don't think many modern cars today have holes/posts I would almost guarantee the badges are glued on, especially since they are customizable from the factory
The following users liked this post:
Spyder Bite (08-11-2021)
The following users liked this post:
Spyder Bite (08-11-2021)
#322
RL Community Team
Rennlist Member
Rennlist Member
The following 2 users liked this post by Westcoast:
halfmonkey (08-11-2021),
Spyder Bite (08-11-2021)
#323
#324
Rennlist Member
Delivered at 10:30, dropped off for ppf at 2. On Friday the miles start to get out on
This is basic white although with the clouds in the second photo I could claim chalk
This is basic white although with the clouds in the second photo I could claim chalk
The following 10 users liked this post by Jeff Jones:
boss2k (10-12-2021),
Boxtop (10-12-2021),
DFW01TT (10-12-2021),
halfmonkey (10-13-2021),
jake18 (12-09-2021),
and 5 others liked this post.
#325
RL Community Team
Rennlist Member
Rennlist Member
@Jeff Jones I was going to say the same thing, two different cars, White changing to Chalk in the second shot!
Congrats!
Congrats!
The following 2 users liked this post by Westcoast:
Jeff Jones (10-12-2021),
P-car-Vancouver (10-13-2021)
#326
Rennlist Member
@Jeff Jones I was going to say the same thing, two different cars, White changing to Chalk in the second shot!
Congrats!
Congrats!
The following users liked this post:
P-car-Vancouver (10-13-2021)
#327
Pro
Last edited by P-car-Vancouver; 10-13-2021 at 02:14 AM.
The following users liked this post:
Jeff Jones (10-13-2021)
#328
Rennlist Member
I’m not doing ceramic this time, at least not yet. I may go full mid-life crisis with the car and do a Martini inspired wrap and ceramic makes that harder to do.
#329
Racer
Just picked mine up from PEC ATL yesterday. CWM with Spyder Classic Interior and Red top. Drove the car 140 mostly-freeway miles through the evening before arriving home and it was very impressive. More driving planned for later today on rural roads closer to my home, with the top down.
The following users liked this post:
DFW01TT (12-09-2021)
#330
Pro
Thanks, I’m loving it! I’m doing full front, rocker panels, full door, rear wheel fender and the carbon fiber door sills. Pista does a good job of customizing the templates to hide seams where possible.
I’m not doing ceramic this time, at least not yet. I may go full mid-life crisis with the car and do a Martini inspired wrap and ceramic makes that harder to do.
I’m not doing ceramic this time, at least not yet. I may go full mid-life crisis with the car and do a Martini inspired wrap and ceramic makes that harder to do.