Notices
996 Forum 1999-2005
Sponsored by:

suspension and wheels

Thread Tools
 
Search this Thread
 
Old 03-17-2017, 07:24 PM
  #1  
vitaminC
Rennlist Member
Thread Starter
 
vitaminC's Avatar
 
Join Date: Aug 2007
Location: Bay Area, CA
Posts: 939
Received 153 Likes on 92 Posts
Default suspension and wheels

After staring at the coilovers, sway bars, drop links and rear toe control arms sitting in the garage for way too long, I finally got around to installing them! It still needs an alignment, corner balance, and final ride height adjustment, but I couldn't resist cleaning it up for a few pics.

Also mounted up the Carrera II wheels that I've had for even longer than the suspension... and they look amazing! I need to get some fresh rubber on them so I can retire those 17" boat anchors.

Two remaining questions:
1- Ride height: how low is too low on the street? The front is at ~4.25" right now, and the back is about 5".

2- Those wheels need refinishing: silver or black? I'm leaning towards black. I like them both, but black does a better job masking brake dust.






Refinished calipers look good, too


With the 17" wheels
Old 03-17-2017, 09:48 PM
  #2  
rebrewer
Rennlist Member
 
rebrewer's Avatar
 
Join Date: Feb 2005
Location: Davis, CA
Posts: 1,209
Received 32 Likes on 29 Posts
Default

I'd go with the silver. Just looks so good.
Old 03-17-2017, 09:53 PM
  #3  
Slakker
Race Car
 
Slakker's Avatar
 
Join Date: Dec 2013
Location: Edmond, OK
Posts: 4,775
Received 270 Likes on 124 Posts
Default

Congrats on the install! I'm a fan of black with the silver, obviously.

Your ride height is as low as you would want to go for even track usage. You will have to take speed bumps and ramps at an angle but it's doable. Just see if it bugs you but it wouldn't hurt to raise it an inch. It will also make it easier on the alignment shops.
Old 03-17-2017, 10:45 PM
  #4  
Cuda911
Race Director
 
Cuda911's Avatar
 
Join Date: Jun 2013
Location: Oceanside/Vista (N. San Diego County), CA
Posts: 11,343
Received 461 Likes on 300 Posts
Default

Originally Posted by rebrewer
I'd go with the silver. Just looks so good.
Indeed.
Old 03-18-2017, 12:17 PM
  #5  
dporto
Rennlist Member
 
dporto's Avatar
 
Join Date: Oct 2014
Location: L.I. NY
Posts: 6,790
Received 1,169 Likes on 797 Posts
Default

Silver...and center caps?
Old 03-18-2017, 12:35 PM
  #6  
Dennis C
Rocky Mountain High
Rennlist Member
 
Dennis C's Avatar
 
Join Date: Aug 2007
Location: Colorado
Posts: 17,572
Received 1,539 Likes on 963 Posts
Default

How about a titanium or anthracite finish? That might look good.
Old 03-18-2017, 12:52 PM
  #7  
johnireland
Rennlist Member
 
johnireland's Avatar
 
Join Date: Sep 2014
Location: Sherman Oaks, CA
Posts: 1,652
Likes: 0
Received 13 Likes on 12 Posts
Default

Silver...black is overdone. Too low is when you can't get in the driveways you need to get in and out of, and it is uncomfortable to drive on the streets you need to drive on.
Old 03-18-2017, 01:26 PM
  #8  
02Z06
Racer
 
02Z06's Avatar
 
Join Date: Feb 2010
Posts: 276
Received 18 Likes on 13 Posts
Default

I like the silver finish also. I am a little biased though, my car was identical until I added aero pieces. It looks to me like it needs a little more drop in the rear to even it out a bit.
Old 03-18-2017, 01:36 PM
  #9  
kmagnuss
Burning Brakes
 
kmagnuss's Avatar
 
Join Date: Nov 2013
Location: Englewood, FL
Posts: 1,187
Received 16 Likes on 10 Posts
Default

Don't forget spacers to sit the wheels flush where they belong.

I'm still a fan of black wheels.
Old 03-18-2017, 02:00 PM
  #10  
Slakker
Race Car
 
Slakker's Avatar
 
Join Date: Dec 2013
Location: Edmond, OK
Posts: 4,775
Received 270 Likes on 124 Posts
Default

Originally Posted by 02Z06
I like the silver finish also. I am a little biased though, my car was identical until I added aero pieces. It looks to me like it needs a little more drop in the rear to even it out a bit.
1" of rake is kind of the Rennlist standard for tracking a car. .35" is the minimum.
Old 03-18-2017, 07:14 PM
  #11  
02Z06
Racer
 
02Z06's Avatar
 
Join Date: Feb 2010
Posts: 276
Received 18 Likes on 13 Posts
Default

Yeah, I get that. I run about 1/2 inch rake on my 996(not tracked). In his 1st photo the car just looks really high in the back to me. Anyhow, the car looks sharp.
Old 03-18-2017, 09:21 PM
  #12  
Hardback
Rennlist Member
 
Hardback's Avatar
 
Join Date: Jul 2008
Location: Miami, Fl.
Posts: 1,562
Received 29 Likes on 16 Posts
Default

Doesn't look low to me. Black wheels look terrible. def spacers on the lightweight 5 spokes. .5 to .75 agreed rake. Drop at good Indy for chassis setup and pay them accordingly.
Attached Images  
Old 03-18-2017, 09:53 PM
  #13  
vitaminC
Rennlist Member
Thread Starter
 
vitaminC's Avatar
 
Join Date: Aug 2007
Location: Bay Area, CA
Posts: 939
Received 153 Likes on 92 Posts
Default

I've got an appt for next Wed to have the suspension properly adjusted. Will ask their opinion regarding height and general alignment settings.

In the pics above, the wheels do have spacers. 5mm all around.

I saw a 996 AE on the road today, and the 'hyper silver' wheels looked really nice. I'll probably end up flipping a coin between silver and black...
Old 03-18-2017, 11:37 PM
  #14  
Jeremy Hazeltine
Pro
 
Jeremy Hazeltine's Avatar
 
Join Date: Jun 2016
Location: Tampa, florida
Posts: 733
Received 104 Likes on 60 Posts
Default

Height is how it should have been from factory! I could see it a bit lower, but my car is a weekend driver, so street height is less important
Old 03-19-2017, 02:32 AM
  #15  
808Bill
Rennlist Member
 
808Bill's Avatar
 
Join Date: Dec 2016
Location: Kauai
Posts: 8,053
Received 807 Likes on 545 Posts
Default

Gun Metal Grey!


Quick Reply: suspension and wheels



All times are GMT -3. The time now is 06:08 AM.