88 S4 5 speed LSD just dropped in my lap
#16
Nordschleife Master
It's what both the front & rear bumper covers are made of.
You aren't the only one to wonder this.
#17
Team Owner
Thread Starter
PU is the front or rear bumper covers its easier to say PU. and type it
#18
Rennlist Member
I recall coming across an '88 5 speed with LSD that was driven hard and put away wet and cosmetically challenged to say the least.
I thought track car, snagged it and haven't regretted it one bit.
I thought track car, snagged it and haven't regretted it one bit.
#19
Team Owner
Thread Starter
I got the clutch out today it was a worn down disc, very thin.
TOB and pilot are racheting so they also get swapped.
Belt looks new as does the pump so a belt retension and put it together,
though there is coolant under the tensioner maybe the pump is oozing from sitting,
hose clamps are tight.
the more I fix the more I like
TOB and pilot are racheting so they also get swapped.
Belt looks new as does the pump so a belt retension and put it together,
though there is coolant under the tensioner maybe the pump is oozing from sitting,
hose clamps are tight.
the more I fix the more I like
#20
Rennlist Member
Is this Ben's car?
#22
Team Owner
Thread Starter
I keep forgetting to take the camera outside to photo the car,
I will get on it tomorrow
I will get on it tomorrow
Last edited by Mrmerlin; 05-03-2017 at 02:58 AM.
#24
Team Owner
Thread Starter
Here are the pictures,
I have already started ,
clutch is out rack is out new rear shox lots more to do ,
intake refresh without PC may also happen since the PC is not peeling. a spray bomb might work for the coating.
Front PU is done and needs to be stripped to its base hood and roof have lots of small dents from hail the fenders dont.
I like the idea of swapping in a fresh caramel carpet and I have a set
I have already started ,
clutch is out rack is out new rear shox lots more to do ,
intake refresh without PC may also happen since the PC is not peeling. a spray bomb might work for the coating.
Front PU is done and needs to be stripped to its base hood and roof have lots of small dents from hail the fenders dont.
I like the idea of swapping in a fresh caramel carpet and I have a set
#26
Team Owner
Thread Starter
update the intake is off and sent to Powder coating as well as the cam covers. one small hit with the ratchet and a big chunk of PC chipped off and sealed the fate of the intake.
I am waiting for Hans motor mounts.
.
Then the front shocks, MMs and OPG will get done,
the clutch is in,
as well as the new SS brake lines rear shocks and the GB flex line for the slave.
An interesting side note someone adjusted the clutch MC so that the pedal push rod would not be released fully,
this let the fluid swell and then the clutch would slip.
a few turns in, and all is well.
NOW for the big news the carpets are getting swapped out,
it looks like a full week to make this change,
\ I am using the Mercedes thick felt carpet material its very hard to work with and a few areas are not great.
but its all one color and smells like fresh adhesive .
I have one more door panel to swap here are a few pictures.
I am waiting for Hans motor mounts.
.
Then the front shocks, MMs and OPG will get done,
the clutch is in,
as well as the new SS brake lines rear shocks and the GB flex line for the slave.
An interesting side note someone adjusted the clutch MC so that the pedal push rod would not be released fully,
this let the fluid swell and then the clutch would slip.
a few turns in, and all is well.
NOW for the big news the carpets are getting swapped out,
it looks like a full week to make this change,
\ I am using the Mercedes thick felt carpet material its very hard to work with and a few areas are not great.
but its all one color and smells like fresh adhesive .
I have one more door panel to swap here are a few pictures.
#28
Team Owner
Thread Starter
interior is done and it looks great.
#29
Team Owner
Thread Starter
well I went out on a limb.
I decided to do some color changes to the cam covers and the intake,
I really like the colors now.
The powder coater place filled in the letters and then cooked the covers,
look at this...... WOW
I decided to do some color changes to the cam covers and the intake,
I really like the colors now.
The powder coater place filled in the letters and then cooked the covers,
look at this...... WOW