Rennlist - Porsche Discussion Forums
water leaked from bolt holes. plastic washer wasn't making a water tight seal
water leaked from bolt holes. plastic washer wasn't making a water tight seal
0 2017/04/28 08:14:14
0 2016/08/29 08:58:53
0 2016/03/09 07:38:18
0 2015/03/10 05:31:51
0 2015/03/07 20:23:34
0 2015/02/16 18:38:29
My 964 at Timberline Lodge. No snow this year out West.
My 964 at Timberline Lodge. No snow this year out West.
0 2015/02/15 19:25:23
Classic car parade at Multnomah Falls
Classic car parade at Multnomah Falls
0 2015/02/15 19:25:16
Packard Super 8
Packard Super 8
0 2015/02/15 19:25:10
Don't get crushed at the monster truck show
Don't get crushed at the monster truck show
0 2015/02/15 19:25:05
0 2015/01/27 21:58:44
0 2014/12/02 13:36:18
Passenger side
Passenger side
0 2014/10/26 19:19:21
Drivers side
Drivers side
0 2014/10/26 19:13:33
0 2014/10/25 22:02:06
wire taps on the car-side of the corner lights
wire taps on the car-side of the corner lights
0 2014/10/25 22:02:04
resistor mounted behind center reflector
resistor mounted behind center reflector
0 2014/10/25 22:01:58
Cable housing secured and cable loop crimped in place.
Cable housing secured and cable loop crimped in place.
0 2014/10/18 13:35:08
Cable installed and housing 'stopped'. Shot a little lube down both cable housings to keep operational for a long time.
Cable installed and housing 'stopped'. Shot a little lube down both cable housings to keep operational for a long time.
0 2014/10/18 13:35:05
Needle nose pliers to fish the cable housing through the body, behind the center-rear reflector. Note 6ohm 50W load resistors secured with metal zip ties for LED tail lights and flashers
Needle nose pliers to fish the cable housing through the body, behind the center-rear reflector. Note 6ohm 50W load resistors secured with metal zip ties for LED tail lights and flashers
0 2014/10/18 13:35:04
Cable cutters, Shimano shift cable, about 2 feet of bicycle shifter cable, strippers (for crimping), and a packet of 18-22g crimp connectors
Cable cutters, Shimano shift cable, about 2 feet of bicycle shifter cable, strippers (for crimping), and a packet of 18-22g crimp connectors
0 2014/10/18 13:35:02
Left tail light removed.
Left tail light removed.
0 2014/10/18 13:35:00
oops. No release cable installed and no screw with which to secure a OEM cable
oops. No release cable installed and no screw with which to secure a OEM cable
0 2014/10/18 13:34:57
Hole behind the Shell sticker through which to fish the wire and cable housing. Metal tube is for the standerd release cable
Hole behind the Shell sticker through which to fish the wire and cable housing. Metal tube is for the standerd release cable
0 2014/10/18 13:34:55
Leak in the seam
Leak in the seam
0 2014/10/13 18:18:38
0 2014/09/25 17:40:12
0 2014/09/25 17:40:11
0 2014/09/25 17:40:08
New Boot
New Boot
0 2014/09/16 09:25:18
Threaded Beru termination
Threaded Beru termination
0 2014/09/16 09:25:15
Torn Boot
Torn Boot
0 2014/09/16 09:25:11