Rennlist - Porsche Discussion Forums
0 2018/02/08 17:49:22
0 2018/02/08 17:49:23
0 2018/02/08 17:51:41
0 2018/02/08 17:51:42
0 2018/02/08 17:53:33
0 2018/02/08 17:53:34
Installed; creases tucked into foam slots should be a stitched line (will correct when have access to sewing machine). Climbed in and out dozen or so times and material is staying put thanks to industrial velcro underneath.
Installed; creases tucked into foam slots should be a stitched line (will correct when have access to sewing machine). Climbed in and out dozen or so times and material is staying put thanks to industrial velcro underneath.
0 2018/02/11 17:14:58
2.5 yards of material will easily complete both seats
2.5 yards of material will easily complete both seats
0 2018/02/11 17:15:01
Passenger's cushion and cover; slot through cushion; cover reinforced already but will need to carefully slice the threading to open the slot. Good luck!
Passenger's cushion and cover; slot through cushion; cover reinforced already but will need to carefully slice the threading to open the slot. Good luck!
0 2018/02/11 17:42:12
Passenger seat base; trim out the area within the "template"
Passenger seat base; trim out the area within the "template"
0 2018/02/11 17:42:15
Driver's cushion and cover; slot already through both.
Driver's cushion and cover; slot already through both.
0 2018/02/11 17:42:18
I made the pepita(ish)/houndstooth set the other day and the Star Wars one today. Takes about 15 minutes to do a 1/2 way decent job. First set (both seats, 4 cushions) cost $59. I will have about $15 in the Star Wars set.....
I made the pepita(ish)/houndstooth set the other day and the Star Wars one today. Takes about 15 minutes to do a 1/2 way decent job. First set (both seats, 4 cushions) cost $59. I will have about $15 in the Star Wars set.....
0 2018/02/13 16:08:17
Seat base requires 19"w x 29"long.
Seat base requires 19"w x 29"long.
0 2018/02/13 16:08:18
Seat back requires same (19"w x 29" high). This is my first fabric project so not sure how to convert that to industry lengths. I just had the fabric store worker roll it out until I said 'stop.'
Seat back requires same (19"w x 29" high). This is my first fabric project so not sure how to convert that to industry lengths. I just had the fabric store worker roll it out until I said 'stop.'
0 2018/02/13 16:08:19
0 2018/02/13 16:13:55
0 2018/02/13 16:13:56
0 2018/02/13 17:38:02
0 2018/02/13 17:38:02
0 2018/02/13 17:38:03
0 2018/02/22 11:48:13
0 2018/02/22 11:53:43
0 2018/02/22 12:08:46
0 2018/02/22 19:24:44
0 2018/02/22 20:06:23
0 2018/02/22 20:06:25
0 2018/02/22 20:06:25
0 2018/02/25 21:01:35
0 2018/02/26 14:34:24
0 2018/02/27 05:27:22
0 2018/02/27 05:27:23
0 2018/03/01 20:38:39
0 2018/03/01 20:38:40
0 2018/03/01 20:38:40
Really enjoying the look of these bronze colored wheels vs the stock black ones.
Really enjoying the look of these bronze colored wheels vs the stock black ones.
0 2018/03/05 14:43:48
0 2018/03/05 14:43:51
0 2018/03/16 08:12:52
0 2018/03/16 08:12:53
0 2018/03/18 19:17:28
Also, I have had the Magnagrafix stone guards on for a couple of weeks and now it looks weird to me when I take them off. Been to 120 with them (closed course, professional driver, etc) so they hold well.
Also, I have had the Magnagrafix stone guards on for a couple of weeks and now it looks weird to me when I take them off. Been to 120 with them (closed course, professional driver, etc) so they hold well.
0 2018/03/18 19:17:55
0 2018/04/01 21:23:13