Rennlist - Porsche Discussion Forums
0 2017/02/23 07:49:33
0 2017/02/23 07:50:53
0 2017/02/23 07:53:35
0 2017/02/23 11:14:35
0 2017/02/23 11:14:37
0 2017/02/24 18:19:29
0 2017/02/24 18:19:42
0 2017/02/24 18:19:53
0 2017/02/26 14:19:31
0 2017/03/07 03:53:04
0 2017/03/07 04:09:02
0 2017/03/09 11:46:18
0 2017/03/09 11:47:10
0 2017/03/10 06:27:20
0 2017/03/10 07:42:07
0 2017/03/10 07:42:40
0 2017/03/10 07:43:09
0 2017/03/11 17:38:26
0 2017/03/11 17:50:18
0 2017/03/11 17:52:51
0 2017/03/11 17:56:21
0 2017/03/12 08:47:17
0 2017/03/12 08:49:37
0 2017/03/13 14:50:51
This is a Rear 19"x11.5" et 62. It's a normal NB fitment, but I don't think it looks right
This is a Rear 19"x11.5" et 62. It's a normal NB fitment, but I don't think it looks right
0 2017/03/14 21:51:24
This is a Front 19"x8.5" et 42. Too far out as well.
This is a Front 19"x8.5" et 42. Too far out as well.
0 2017/03/14 21:55:56
This is a Rear 19"x11" et 52. Also too far out. Comparing it to the previous photo, because this wheel is 1/2" narrower, it would be equivalent to an 11.5" wide wheel with an et of 58, so it's 4mm further out than the 11.5 et 62
This is a Rear 19"x11" et 52. Also too far out. Comparing it to the previous photo, because this wheel is 1/2" narrower, it would be equivalent to an 11.5" wide wheel with an et of 58, so it's 4mm further out than the 11.5 et 62
0 2017/03/14 21:56:06
This is a Front 19"x8.5" et 53 and a much better fitment. It's in a little, which is why I've ordered an et 50, which will pull it out 3mm
This is a Front 19"x8.5" et 53 and a much better fitment. It's in a little, which is why I've ordered an et 50, which will pull it out 3mm
0 2017/03/14 22:00:51
Wife's car has 997 GT3 wheels, which are Front - 19" x 8.5" with 53mm offset Rear - 19" x 12" with 68mm offset and this fitment is almost perfect, so I'm going 3mm out in the front and 2mm in in the rear compared to hers. I don't have the same photos from the perspective as those that have been on my car - maybe I can take a couple tomorrow.
Wife's car has 997 GT3 wheels, which are Front - 19" x 8.5" with 53mm offset Rear - 19" x 12" with 68mm offset and this fitment is almost perfect, so I'm going 3mm out in the front and 2mm in in the rear compared to hers. I don't have the same photos from the perspective as those that have been on my car - maybe I can take a couple tomorrow.
0 2017/03/14 22:17:25
997 Fire Extinguisher Mount on 997 seat
997 Fire Extinguisher Mount on 997 seat
0 2017/03/15 04:07:51
Brushed Stainless Door Sill Plate
Brushed Stainless Door Sill Plate
0 2017/03/15 04:10:54
Door lock knob, bezel, & button
Door lock knob, bezel, & button
0 2017/03/15 04:25:38
0 2017/03/15 04:46:11
0 2017/03/15 04:52:49
0 2017/03/15 12:37:03
0 2017/03/16 18:51:11
0 2017/03/16 18:52:06
0 2017/03/16 18:52:28
0 2017/03/18 06:20:06
0 2017/03/18 06:20:07