Rennlist - Porsche Discussion Forums
This is a 997 carrier bracket (not a 100% sure). Notice the squarer bottom and the longer piece is on the right side.
This is a 997 carrier bracket (not a 100% sure). Notice the squarer bottom and the longer piece is on the right side.
0 2016/10/08 19:52:37
0 2016/10/09 11:13:25
0 2016/10/10 23:17:13
0 2016/10/10 23:17:18
0 2016/10/10 23:17:21
Some bent headers. Maybe from delivery
Some bent headers. Maybe from delivery
0 2016/10/14 20:38:52
testing the tranny fit. Was able to clear the rear and push this in place.
testing the tranny fit. Was able to clear the rear and push this in place.
0 2016/10/14 20:38:57
0 2016/10/14 20:39:01
Just took the engine off the hoist and put on the hydraulic table. Holds fine
Just took the engine off the hoist and put on the hydraulic table. Holds fine
0 2016/10/14 20:39:05
Nice and tucked away for the night
Nice and tucked away for the night
0 2016/10/14 20:39:09
Some bad head..
Some bad head..
0 2016/10/14 20:39:15
Where does this one go??
Where does this one go??
0 2016/10/15 22:29:21
This one is mounted
This one is mounted
0 2016/10/15 22:29:24
Bit of rust on the valve. Will replace both of them.
Bit of rust on the valve. Will replace both of them.
0 2016/10/15 22:29:27
I think this is the wayward change over valve.
I think this is the wayward change over valve.
0 2016/10/16 08:34:44
0 2016/10/16 11:08:58
0 2016/10/17 19:43:55
The last 3 inches needed for clearance. Up about 38".
The last 3 inches needed for clearance. Up about 38".
0 2016/10/20 22:33:15
The cart with the engine on it fits perfectly underneath.
The cart with the engine on it fits perfectly underneath.
0 2016/10/20 22:33:19
0 2016/10/20 22:33:24
Once I mate the tranny should have good space to bolt everything up.
Once I mate the tranny should have good space to bolt everything up.
0 2016/10/20 22:33:28
These two need to make nice.
These two need to make nice.
0 2016/10/20 22:36:10
Removed the starter and now can see where to bolt down TC and drive plate. The Germans could have been a bit smarter on this part I think.
Removed the starter and now can see where to bolt down TC and drive plate. The Germans could have been a bit smarter on this part I think.
0 2016/10/22 16:23:27
My days work. One of my buddies was in Sacramento and stopped by Qualified German Salvage. Picked up the screws I needed and we mated the two together for a test fit.
My days work. One of my buddies was in Sacramento and stopped by Qualified German Salvage. Picked up the screws I needed and we mated the two together for a test fit.
0 2016/10/22 16:23:33
Fits nicely
Fits nicely
0 2016/10/22 16:23:38
0 2016/11/01 22:39:26
This is the "hook" per the PET. How is it attached to the tranny?
This is the "hook" per the PET. How is it attached to the tranny?
0 2016/11/01 22:40:26
Number #2 is the hook. Anyone know how to install this item. It is not as easy as it looks.
Number #2 is the hook. Anyone know how to install this item. It is not as easy as it looks.
0 2016/11/01 23:41:34
0 2016/11/02 18:30:04
No oil or grease on it when I took it out.
No oil or grease on it when I took it out.
0 2016/11/06 11:44:59
pully rolls smoothly.
pully rolls smoothly.
0 2016/11/06 11:45:04
This bolt appears to have been stripped. Now what do I do? ?
This bolt appears to have been stripped. Now what do I do? ?
0 2016/11/06 19:58:20
The bolt attaches the throttle body to the IPD plenum. I don't know how far the stripping is.
The bolt attaches the throttle body to the IPD plenum. I don't know how far the stripping is.
0 2016/11/06 19:58:44
Enlarge to see threads.
Enlarge to see threads.
0 2016/11/09 23:36:36
This is the part number for the oil filler tube. Be careful as this tube is longer than the one for X51 engines.
This is the part number for the oil filler tube. Be careful as this tube is longer than the one for X51 engines.
0 2016/11/09 23:39:02
Test fit
Test fit
0 2016/11/12 19:42:50
Test Fit
Test Fit
0 2016/11/12 19:42:54
How does this hose connect from the transmission?
How does this hose connect from the transmission?
0 2016/11/13 18:16:10
Tranny and Engine connection
Tranny and Engine connection
0 2016/11/19 14:23:06
Engine is in and cart is gone
Engine is in and cart is gone
0 2016/11/19 14:23:11