Rennlist - Porsche Discussion Forums
Vapor Honed parts
Vapor Honed parts
0 2021/01/08 21:58:23
0 2021/01/08 21:58:29
0 2021/01/08 21:58:36
0 2021/01/08 22:02:30
0 2021/01/08 22:02:36
What is this brown stuff? Is this shock done for and needs replacing? Plan is to send them to Bilstein for refurb.
What is this brown stuff? Is this shock done for and needs replacing? Plan is to send them to Bilstein for refurb.
0 2021/01/08 22:02:41
0 2021/01/08 22:02:47
0 2021/01/11 20:04:28
0 2021/01/11 20:04:34
0 2021/01/11 20:04:38
These are cut, where can I get new ones?
These are cut, where can I get new ones?
0 2021/01/15 19:36:26
A few light spots on he CV part
A few light spots on he CV part
0 2021/01/28 21:45:50
Had to reorder the correct size boot kit :*(
Had to reorder the correct size boot kit :*(
0 2021/01/28 21:46:14
Some more light spots
Some more light spots
0 2021/01/28 21:46:43
Here are the outers. I just cleaned them up and will repack with grease.
Here are the outers. I just cleaned them up and will repack with grease.
0 2021/01/28 21:47:03
These came in the boot kit, definitely the wrong parts. I didn't have a gasket on the originals.
These came in the boot kit, definitely the wrong parts. I didn't have a gasket on the originals.
0 2021/01/28 21:47:29
New 18" wheels
New 18" wheels
0 2021/01/28 22:09:03
Coilovers look good. I was able to get new spring collars etc.
Coilovers look good. I was able to get new spring collars etc.
0 2021/01/28 22:09:10
0 2021/01/28 22:09:16
Finally got the rubber off these. Used Zylene
Finally got the rubber off these. Used Zylene
0 2021/01/28 22:09:23
Is this to damaged?
Is this to damaged?
0 2021/01/30 18:08:03
This pitting is on the other side
This pitting is on the other side
0 2021/01/30 18:08:10
Can I run with it or get a new one?
Can I run with it or get a new one?
0 2021/01/30 18:08:16
0 2021/02/01 22:04:09
0 2021/02/01 22:04:16
0 2021/02/01 22:04:21
0 2021/02/01 22:04:27
This is the rubber piece that is ripped. Everything else looks ok.
This is the rubber piece that is ripped. Everything else looks ok.
0 2021/02/01 22:04:33
This is the plate I have that covers the metal race but not the brownish part of the bearing. I do have one that can but which should I use? ?
This is the plate I have that covers the metal race but not the brownish part of the bearing. I do have one that can but which should I use? ?
0 2021/02/10 19:53:58
Here is the bearing inside the wheel carrier. Do I put a plate on the metal inner race and just press it onto the hub?
Here is the bearing inside the wheel carrier. Do I put a plate on the metal inner race and just press it onto the hub?
0 2021/02/10 19:54:04
0 2021/02/15 09:52:02
0 2021/02/15 09:52:08
One on the left is bent, one on the right is new one. How do I get the bent one out of the carrier?
One on the left is bent, one on the right is new one. How do I get the bent one out of the carrier?
0 2021/02/15 10:09:11
Will the chips around the edges be a problem? Seems like it will press in.
Will the chips around the edges be a problem? Seems like it will press in.
0 2021/05/13 14:09:58
Which way do I press this in?
Which way do I press this in?
0 2021/05/13 14:10:05
Here you see a big chip. The bushing seems like it will press in though. Any thoughts?
Here you see a big chip. The bushing seems like it will press in though. Any thoughts?
0 2021/05/13 14:10:11
Here another chip.
Here another chip.
0 2021/05/13 14:10:18
This is an After of a set of control arms I bought because I was waiting so long on the bushings. I had them cleaned up but they are for a 964. Holes are a bit smaller than the 993 holes.
This is an After of a set of control arms I bought because I was waiting so long on the bushings. I had them cleaned up but they are for a 964. Holes are a bit smaller than the 993 holes.
0 2021/05/13 14:10:23
Before cleanup.
Before cleanup.
0 2021/05/13 14:14:54
0 2021/07/19 11:01:56