Rennlist - Porsche Discussion Forums
0 2014/08/30 20:28:54
0 2014/08/31 10:50:53
0 2014/10/23 19:50:05
0 2014/11/15 15:59:29
0 2014/11/15 15:59:54
0 2014/11/15 16:00:31
0 2014/11/15 16:01:01
0 2014/11/15 16:01:22
0 2015/02/08 19:21:34
0 2015/02/08 19:24:37
0 2015/03/15 16:42:30
0 2015/03/15 16:42:50
0 2015/03/16 03:43:09
0 2015/06/17 04:19:07
0 2015/06/17 04:19:30
0 2017/05/05 13:19:30
0 2017/05/05 13:47:33
0 2017/05/06 18:57:53
0 2017/06/15 18:54:50
0 2017/08/13 16:01:07
My setup used an Eaton M90 from a 1990 Ford Thunderbird SC. It fit very nicely and lined up well with the stock pullies. Don't forget to run a bypass so the SC can freewheel when not inder load, helps with fuel economy. I was running 5.5 psi of boost and the car was fantastic. Loads of power from idle on. I never got it dynoed but I estimate it was making 180rwhp. I used Rogue's NA tune and the tunibility was amazing. I ran a front mount IC.
My setup used an Eaton M90 from a 1990 Ford Thunderbird SC. It fit very nicely and lined up well with the stock pullies. Don't forget to run a bypass so the SC can freewheel when not inder load, helps with fuel economy. I was running 5.5 psi of boost and the car was fantastic. Loads of power from idle on. I never got it dynoed but I estimate it was making 180rwhp. I used Rogue's NA tune and the tunibility was amazing. I ran a front mount IC.
0 2017/11/27 13:26:47
Top view of where the SC was fit.
Top view of where the SC was fit.
0 2017/11/27 13:31:55
View from under the car of the SC pulley location.
View from under the car of the SC pulley location.
0 2017/11/27 13:33:02
0 2018/12/22 15:16:14
0 2018/12/22 15:16:37
0 2019/10/09 05:54:35
0 2019/10/09 05:55:02
0 2019/10/09 05:55:26
0 2019/10/14 18:41:25
0 2019/10/14 19:14:18
0 2019/10/15 14:34:13
0 2019/10/15 14:34:27
0 2019/10/15 14:34:43
0 2019/10/15 14:34:55
0 2019/10/15 14:35:06
0 2019/10/18 01:24:48
0 2019/10/18 01:25:05
0 2019/10/18 01:25:26
0 2019/10/18 01:25:41
0 2019/10/18 01:25:56