Rennlist - Porsche Discussion Forums
my car, my building
my car, my building
0 2018/10/19 15:44:59
0 2019/07/06 20:08:23
0 2019/07/06 20:08:40
old bolt on top - replacement on bottom after I backed it out of the hole
old bolt on top - replacement on bottom after I backed it out of the hole
0 2019/07/06 20:19:49
at first I didn't know what was "on" the new bolt but then I tried to wire brush it and found I was able to "unscrew" it.
at first I didn't know what was "on" the new bolt but then I tried to wire brush it and found I was able to "unscrew" it.
0 2019/07/06 20:19:51
This is a shot after I drilled out the hole with a 1/4" bit
This is a shot after I drilled out the hole with a 1/4" bit
0 2019/07/12 05:54:26
tapping threads for the helicoil - my turner tool was too big for the space requiring me to re-attach tot he tap every 1/4 turn.
tapping threads for the helicoil - my turner tool was too big for the space requiring me to re-attach tot he tap every 1/4 turn.
0 2019/07/12 05:55:32
The helicoil is placed inside the newly tapped hole. You can see the tang of the helicoil in the back of the hole.
The helicoil is placed inside the newly tapped hole. You can see the tang of the helicoil in the back of the hole.
0 2019/07/12 07:21:46
Torquing the bolt....and it held!
Torquing the bolt....and it held!
0 2019/07/12 07:24:09
The completed installation.
The completed installation.
0 2019/07/12 07:25:05
This is the complete kit unboxed....I got extra parts! zip ties and wire management casing - those I understand - the rubber stoppers, not so much
This is the complete kit unboxed....I got extra parts! zip ties and wire management casing - those I understand - the rubber stoppers, not so much
0 2020/05/19 14:58:55
AOS in place - also replaced my fuel injectors which you can see in the lower left. Hardest part of the install for me...attaching the quick connect hoses to the AOS. Took me hours. I just couldn't get them to click into place forever.
AOS in place - also replaced my fuel injectors which you can see in the lower left. Hardest part of the install for me...attaching the quick connect hoses to the AOS. Took me hours. I just couldn't get them to click into place forever.
0 2020/05/19 15:02:18
I had to cut this hose management clip off of my hose bundle to complete the install. PT3, that is the only item I would add to your nicely complete UAOS kit.
I had to cut this hose management clip off of my hose bundle to complete the install. PT3, that is the only item I would add to your nicely complete UAOS kit.
0 2020/05/19 15:04:34
0 2020/05/19 15:07:25
The completed installation - I have since re-routed the vacuum sensor wiring behind the alternator.
The completed installation - I have since re-routed the vacuum sensor wiring behind the alternator.
0 2020/05/19 15:08:15
0 2020/05/19 15:10:30