FS: 987 Wheels (19" 997.1 Turbo Style)
04-17-2011, 04:42 PM
#1
Rennlist Member
Thread Starter
FS: 987 Wheels (19" 997.1 Turbo Style)
(Willing to entertain REASONABLE offers! See my pricing strategy below.)
997.1 Turbo style Factory Porsche wheels taken off of my Boxster Spyder (It was ordered from the factory with these optional wheels). Pulled them off with about 800 miles on the car. I have listed the part descriptions, part numbers, and the Porsche prices below:
Front: 8J x 19 ET 57 997.362.156.02 23 pounds ($1958 List; ~$1200 Net)
Rear: 9.5J x 19 ET 46 997.362.158.08 24.5 pounds ($2069 List; ~$1280 Net)
Wheels include valve stems, but no TPMS sensors.
Fits 987 Boxster and Cayman.
Porsche description:
"Straight from the awesome 911 Turbo, this five-pointed star forged aluminum alloy wheel employs a lightweight multi-ribbed design. The forging results in optimal weight, strength, and a high resistance to deformation. Distinctive two-tone finish brings additional character."
Also included are a set of the polished black crest center caps that go with these wheels: 997.361.305.00 ($58.57 List; ~$36 Net each)
Also have available a set of Porsche 5mm wheel spacers that were used with these wheel on my car: 997.361.605.90 ($71.70 List; ~$51 Net each). First dibs on the spacers goes to the wheel purchaser - if they don't go with the wheels, I will sell separately.
Condition: As I stated, these were on the car for about 800 miles (2 weeks?) until I received my Spyder wheels. Condition is excellent - essentially new with the original tires having been mounted and then dismounted. One exception (darn it!) that I found when cleaning them today - one front has a small scratch on the face on a spoke near a lug hole (see pic).
Pricing: See Porsche prices above (!) Suncoast will sell you a set of these wheels with tires and valve stems (obviously) for $4995. Allowing $1300 for a tire set (as per Tire Rack), the wheels/stems are worth about $3700. I am pricing my set at $2,600.
A set of 4 center caps would run about $140. I am pricing my set at $100.
A set of 4 5 mm wheel spacers would run about $200. I am pricing my set at $100.
Thus, wheels, valve stems, and center caps for $2,700. Add in the 5 mm spacers, and it's all yours for $2,800 PLUS Shipping from California.
997.1 Turbo style Factory Porsche wheels taken off of my Boxster Spyder (It was ordered from the factory with these optional wheels). Pulled them off with about 800 miles on the car. I have listed the part descriptions, part numbers, and the Porsche prices below:
Front: 8J x 19 ET 57 997.362.156.02 23 pounds ($1958 List; ~$1200 Net)
Rear: 9.5J x 19 ET 46 997.362.158.08 24.5 pounds ($2069 List; ~$1280 Net)
Wheels include valve stems, but no TPMS sensors.
Fits 987 Boxster and Cayman.
Porsche description:
"Straight from the awesome 911 Turbo, this five-pointed star forged aluminum alloy wheel employs a lightweight multi-ribbed design. The forging results in optimal weight, strength, and a high resistance to deformation. Distinctive two-tone finish brings additional character."
Also included are a set of the polished black crest center caps that go with these wheels: 997.361.305.00 ($58.57 List; ~$36 Net each)
Also have available a set of Porsche 5mm wheel spacers that were used with these wheel on my car: 997.361.605.90 ($71.70 List; ~$51 Net each). First dibs on the spacers goes to the wheel purchaser - if they don't go with the wheels, I will sell separately.
Condition: As I stated, these were on the car for about 800 miles (2 weeks?) until I received my Spyder wheels. Condition is excellent - essentially new with the original tires having been mounted and then dismounted. One exception (darn it!) that I found when cleaning them today - one front has a small scratch on the face on a spoke near a lug hole (see pic).
Pricing: See Porsche prices above (!) Suncoast will sell you a set of these wheels with tires and valve stems (obviously) for $4995. Allowing $1300 for a tire set (as per Tire Rack), the wheels/stems are worth about $3700. I am pricing my set at $2,600.
A set of 4 center caps would run about $140. I am pricing my set at $100.
A set of 4 5 mm wheel spacers would run about $200. I am pricing my set at $100.
Thus, wheels, valve stems, and center caps for $2,700. Add in the 5 mm spacers, and it's all yours for $2,800 PLUS Shipping from California.
