SoCal - BRABUS 992 TURBO S PROJECT THREAD | TAG MOTORSPORTS
#1
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
SoCal - BRABUS 992 TURBO S PROJECT THREAD | TAG MOTORSPORTS
Greetings Everyone
Welcome to the build thread for our BRABUS 992 Turbo S project
As many of you are aware, BRABUS recently entered the Porsche 992 and Taycan markets, and we have been thoroughly impressed by their offerings. We've had lots of hands-on experience doing Brabus builds on Mercedes-Benz vehicles, so we knew their quality was top-notch. We wanted to try their new Porsche line, so we procured a 992 Turbo S to built one.
Now, the car is actually further along than you'll see in the first few posts. It's going up to Monterey to be displayed with BRABUS during Car Week, so we've had to keep the build going quickly.
First Up: The Car
We found this fantastic spec 992 Turbo S locally.
A Chalk exterior over a black Heritage Design Package Houndstooth interior
Plus some black accents on the exterior that should go nicely with all the extra carbon we'll be fitting to it.
Check back for more updates on the build process.
For now, here she is, in all her bone-stock glory:
__________________
TAG MOTORSPORTS
866-793-5490 x1192
web: www.TAGMotorsports.com - email: sales@tagmotorsports.com
Authorized Dealer For: HRE, Vossen, TechArt, AWE, Bilstien, KW, Akrapovic, Capristo, Fabspseed, BBI, Vorsteiner, Milltek, 1016 Industries, BBS, Brembo, GMG, H&R, Pirelli, Michelin, Hankook & more.
TechArt & AWE Tuning's #1 Volume Dealer Nationwide
866-793-5490 x1192
web: www.TAGMotorsports.com - email: sales@tagmotorsports.com
Authorized Dealer For: HRE, Vossen, TechArt, AWE, Bilstien, KW, Akrapovic, Capristo, Fabspseed, BBI, Vorsteiner, Milltek, 1016 Industries, BBS, Brembo, GMG, H&R, Pirelli, Michelin, Hankook & more.
TechArt & AWE Tuning's #1 Volume Dealer Nationwide
#2
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Next, we have some shots of the Brabus Monoblock Z "Platinum Edition" Wheels.
Front: 21x9.5 ET35
Rear: 22x12 ET65
Gloss Black Finish
Front: 21x9.5 ET35
Rear: 22x12 ET65
Gloss Black Finish
#3
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Some shots of the parts laid out, ready to be installed.
We're very impressed with the fit and finish of these BRABUS parts.
We're very impressed with the fit and finish of these BRABUS parts.
#4
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Here are some shots from the build process
All taken apart
Brabus Inconel Rear Muffler
Brabus Tailpipes integrated into the carbon rear diffuser
Brabus Tailpipes integrated into the carbon rear diffuser
Brabus Exhaust and Rear Diffuser mounted
Brabus Sport Springs
Brabus Sport Springs
Our Custom Paint-Matched PCCB Calipers in Chalk
Test Fitting Carbon Parts
Carbon Parts Mounted
All taken apart
Brabus Inconel Rear Muffler
Brabus Tailpipes integrated into the carbon rear diffuser
Brabus Tailpipes integrated into the carbon rear diffuser
Brabus Exhaust and Rear Diffuser mounted
Brabus Sport Springs
Brabus Sport Springs
Our Custom Paint-Matched PCCB Calipers in Chalk
Test Fitting Carbon Parts
Carbon Parts Mounted
#5
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Putting on the finishing touches before it shipped off to Monterey
Setting the ride height
Setting the ride height
Setting the ride height
Paint-Matched End Plates
Paint-Matched End Plates
Brabus Pedals & Floor Mats installed
Alignment time!
Brabus Side Skirt Attachment
The Finishing Touches
The Finishing Touches
Ready for Car Week!
Setting the ride height
Setting the ride height
Setting the ride height
Paint-Matched End Plates
Paint-Matched End Plates
Brabus Pedals & Floor Mats installed
Alignment time!
Brabus Side Skirt Attachment
The Finishing Touches
The Finishing Touches
Ready for Car Week!
The following users liked this post:
Coppi52 (08-31-2024)