Enclosed Trailer Question
#1
Drifting
Thread Starter
Enclosed Trailer Question
Anyone have a tire changer and/or wheel balance inside your trailer ?
If so - how did you manage to secure to floor ?
Anyone have a rail system on the floor to move the equipment withing specific parameters on the floor vs. bolting ?
Thanks.
If so - how did you manage to secure to floor ?
Anyone have a rail system on the floor to move the equipment withing specific parameters on the floor vs. bolting ?
Thanks.
#3
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
you have a lot of stuff so to have flexibility, mount E track or A track along the entire length of floor
i may very well do thqt too
i may very well do thqt too
#4
Drifting
the drift group i work with uses etrack with tie downs for the tire changer. they don't need a balancer. then there's the air compressor. and generator. lots of ****
#6
Rennlist Member
Sometimes they are closed and they have limited hours. BRP tire store is pretty good but I have had issues at TH with short hours and they broke a TPMS.
Trending Topics
#8
Drifting
Thread Starter
I think i stumbled into something - i'll report when i get back state side.
Long story, i got some snapon stuff on a great deal. For how much it cost to mount and balance tires in the bay area- this pays for itself for me within 2 years.
Plus i have friends locally that would love to use it- and i can save them ~$120 bucks. for 1 hour work on a Saturday or Sunday morning.
This too. Plus i don't have to deal with people being harsh on the lips of wheel.
#9
Rennlist Member
I'll pay you at the track :-)
#11
Drifting
remember you will need a lot of high psi air to seat beads on low profile track tires, unless you're driving a miata lol. when i mounted my trailer tires using the tire machine in the back of the trailer, it sucked
#12
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
pls comer to my cave
pick up my tires and mount them ;-)
pick up my tires and mount them ;-)
#13
Trucker
Rennlist Member
Rennlist Member
I would do e-track all the way. FWIWI just placed an order for a new custom 28' 4926 Featherlite;
Two e-track strip on the floor all the way will run $840 MSRP
One e-track strip on each wall (L&R) all the way will run $750 MSRP
4 additional floor D-rings will run $300 MSRP
Two e-track strip on the floor all the way will run $840 MSRP
One e-track strip on each wall (L&R) all the way will run $750 MSRP
4 additional floor D-rings will run $300 MSRP
#14
Rennlist Member
I would do e-track all the way. FWIWI just placed an order for a new custom 28' 4926 Featherlite;
Two e-track strip on the floor all the way will run $840 MSRP
One e-track strip on each wall (L&R) all the way will run $750 MSRP
4 additional floor D-rings will run $300 MSRP
Two e-track strip on the floor all the way will run $840 MSRP
One e-track strip on each wall (L&R) all the way will run $750 MSRP
4 additional floor D-rings will run $300 MSRP
#15
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
^ when are u coming over then?