Notices

Trailex Enclosed Load/Unload While Disconnected From Tow Vehicle

Thread Tools
 
Search this Thread
 
Old 11-02-2023, 09:37 PM
  #16  
s996
Rennlist Member
 
s996's Avatar
 
Join Date: Nov 2008
Location: East Tennessee
Posts: 390
Received 38 Likes on 28 Posts
Default

Exact situation when I had my Trailex and stored my car in it with the trailer face first into the garage. You need to put a 4 inch post three feet deep into the ground with sacrete around it and in it and a ball hitch on it. The Trailex is only 1100 pounds and you can move it around with a trailer dolly and the wheel on a flat surface and load and easily unload the car with it attached to this post and the wheels chocked.

Only issue is putting brakes on abruptly when driving into trailer and rocking trailer.

good luck

Old 11-03-2023, 06:49 PM
  #17  
patriot993
Rennlist Member
 
patriot993's Avatar
 
Join Date: Oct 2007
Location: Indiana
Posts: 591
Received 76 Likes on 51 Posts
Default

Thanks for all of the replies - I will work on the solution over the next few weekends - first step is making room in the barn ;-)
Old 11-04-2023, 11:28 PM
  #18  
cienegavista
Rennlist Member
 
cienegavista's Avatar
 
Join Date: May 2016
Posts: 94
Received 30 Likes on 15 Posts
Default

24 foot enclosed ATC, easy to load/unload my spec911 unhitched. Trailer was long enough and car was light enough made no diff. Of course good wheel chocks etc are recommended etc. But, just depends on length of trailer and weight of the car
Old 11-06-2023, 03:19 PM
  #19  
Rob in VA
Three Wheelin'
 
Rob in VA's Avatar
 
Join Date: May 2006
Location: Richmond, VA
Posts: 1,475
Received 25 Likes on 22 Posts
Default

When I had an enclosed trailex, I used a small floor jack at the rear of the trailer underneath one of the i beams.



Quick Reply: Trailex Enclosed Load/Unload While Disconnected From Tow Vehicle



All times are GMT -3. The time now is 02:26 PM.