997 bore scoring solution
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
friend has 05 997 S with bore scoring. still driveable. what is the best cost effective solution these days for someone in GTA?
is Porsche short block available and still reasonable? or any local machine shops with a good solution? is it worth it to send to US?
I feel bad for these cars![Frown](https://rennlist.com/forums/images/smilies/frown.gif)
is Porsche short block available and still reasonable? or any local machine shops with a good solution? is it worth it to send to US?
I feel bad for these cars
![Frown](https://rennlist.com/forums/images/smilies/frown.gif)
#2
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
LS3. Smaller, lighter, more power. This conversion is becoming increasingly popular.
The following users liked this post:
eyedoc (Yesterday)
#3
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Local Honda engine swap
or LS V8 swap are 2 relatively inexpensive solutions. Porsche engine will run about $40K I think.
or LS V8 swap are 2 relatively inexpensive solutions. Porsche engine will run about $40K I think.
Last edited by lowbee; Yesterday at 05:18 PM.
#4
Nordschleife Master
Join Date: Sep 2004
Location: Toronto, Dubai, Kuwait & Bombay
Posts: 6,978
Received 86 Likes
on
65 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
friend has 05 997 S with bore scoring. still driveable. what is the best cost effective solution these days for someone in GTA?
is Porsche short block available and still reasonable? or any local machine shops with a good solution? is it worth it to send to US?
I feel bad for these cars![Frown](https://rennlist.com/forums/images/smilies/frown.gif)
is Porsche short block available and still reasonable? or any local machine shops with a good solution? is it worth it to send to US?
I feel bad for these cars
![Frown](https://rennlist.com/forums/images/smilies/frown.gif)
If you need a shop to rebuild A to Z then there is Dirk @ Mantis he's been doing a lot of those
There is also Chariots of Simcoe in Orangeville, i have not used him myself but seen his work and he is a active member of PTN he posts his work often on the PTN Facebook
but yes 30-40k for the Rebuild like @lowbee mentioned about
Last edited by Zookie; Yesterday at 05:22 PM.
#5
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Someone I know had the engine rebuilt, displacement increased to 3.9L at TSH Auto in North York. Cost about $18K. Seems happy with results.
#6
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Saw a fellow on FB selling an LS2. Asking $3600