zachr

I'm working on my data logging setup for autocross (and track) with SoloStorm and a RaceCapture GPS+data logging box. Unfortunately the data provided over OBD is insufficient so this week I'm going to get taps set up on the CAN wires behind the passenger footwell fuse panel. Unfortunately RaceCapture doesn't have predefined CAN mappings for the 992 as far as I can tell (although some data may work with the 991 profile they have).

Is this something I'd be able to find in PIWIS, perhaps? Or if anyone happens to have resources for this info I'd be very appreciative!

zachr

hopeful bump!

jhenson29

I would post in the data acquisition sub forum.

https://rennlist.com/forums/data-acq...ng-and-de-233/

zachr

Ooh, good idea! Didn't know that was a subforum. Done.
https://rennlist.com/forums/data-acq...l#post19528634

zachr

Lil bump for anyone keeping up... I spent some time reverse engineering the channels I wanted in today, but couldn't quite nail down the formulas. I shared what I found in the thread above in case anyone here is interested.