When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Selling a used set of 997 C2S wheel carriers
Same as the 987 part number.
Bearings are in excellent condition with one having just been replaced.
They are just a bit dirty and minor surface rust on the hub, can be cleaned off easily enough.
No damage to any part.
Asking $750 shipped for the pair.
Part numbers:
99734115725 LH
99734115825 RH
Last edited by AltitudeRacing; 05-29-2024 at 04:47 PM.
Reply
Sharing this bc I went through some trouble replacing the front right knuckle on my C2S - though the embossed part numbers on these are interchangeable between 987/997, caliper bolt holes are machined differently depending on base vs S (larger distance between the caliper bolt holes on the S trim knuckles vs shorter on base)
Sharing this bc I went through some trouble replacing the front right knuckle on my C2S - though the embossed part numbers on these are interchangeable between 987/997, caliper bolt holes are machined differently depending on base vs S (larger distance between the caliper bolt holes on the S trim knuckles vs shorter on base)
Correct, these are for upgrading to "S" calipers if using on a base carrera.
08-12-2024, 11:52 PM
