Mark this thread as Unsold
PCCB 997 GT3 Rotors (3000 street miles) and NEW pads
#1
Rennlist Member
Thread Starter
PCCB 997 GT3 Rotors (rear show wear fronts are good)
Category: Wheels & Tires
Price (no $ sign please): $4000
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 997
Location (Region): SouthEast
Item Condition: Used
4000 shipped (better than 50% discount versus new and again these are in like new condition) or 3500 cash picked up in charlottesville VA 22901.
Or best offer
Contact through PM or call/text 434 981 6714
Will post some pics ASAP but these babies are in fantastic condition
Last edited by Fritz Flynn; 04-21-2015 at 12:47 PM. Reason: info change
#2
Rennlist Member
Thread Starter
Rotors have approx 6000 miles. I was told by the previous owner who is seriously a cool straight forward dude that he swapped to steel rotors when he took possession at 3k miles but he took possession at around 5800 miles so in any case the rotors have more like 6k miles.
The rear rotors have wear indicators showing in the pics (that's those strange nickle size circles) One of the rear rotors also has some flaking but is still over all in good shape and I'll also post a close up picture of that.
Pads are new so no worries there and will post pics of those as well. Pads are the Pagid P40s
Will sell pads separately for 700 shipped. Probably cost around 850 plus shipping
The rear rotors have wear indicators showing in the pics (that's those strange nickle size circles) One of the rear rotors also has some flaking but is still over all in good shape and I'll also post a close up picture of that.
Pads are new so no worries there and will post pics of those as well. Pads are the Pagid P40s
Will sell pads separately for 700 shipped. Probably cost around 850 plus shipping
Last edited by Fritz Flynn; 03-27-2015 at 03:27 PM. Reason: adding picture
#4
Rennlist Member
Thread Starter
#5
If they're tracked they'll definitely wear out much earlier. Like he said, measurement will definitely help with your sale. Good luck!
#6
Rennlist Member
Thread Starter
#7
Rennlist Member
Trending Topics
#9
Rennlist Member
Thread Starter
I think 6500 is still pretty good deal even if they saw some track time but I'll get as much info on these as I can
#10
Rennlist Member
Thread Starter
Here are the measurements in inches and hundredths of an inch
LF rotor is: 1.405 inches or 35.66mm
RF rotor is: 1.41 or 35.81mm
LR rotor is: 1.12 or 28.45mm
RR rotor is: 1.13 or 28.70mm
Low on rear rotor is 27.7 so rears still have some life but nearing the end.
Low limit on the fronts is 33.80 so they are good or have lots of life left in them.
LOWERING THE PRICE AGAIN 4500
LF rotor is: 1.405 inches or 35.66mm
RF rotor is: 1.41 or 35.81mm
LR rotor is: 1.12 or 28.45mm
RR rotor is: 1.13 or 28.70mm
Low on rear rotor is 27.7 so rears still have some life but nearing the end.
Low limit on the fronts is 33.80 so they are good or have lots of life left in them.
LOWERING THE PRICE AGAIN 4500
Last edited by Fritz Flynn; 04-18-2015 at 05:35 PM. Reason: editing content
#15
Rennlist Member
Thread Starter
I'll measure them again when I get home though
Bottomline: The fronts are good and the rears show wear but my price is silly good